ReviewsWorthy.net is reader-supported. As an Amazon affiliate, we earn from qualifying purchases.Learn more
In Brief: Best Corded Drill
- Black and Decker (DR260C)
- DeWalt DWD115K
- DeWalt DWD210G
- Porter-Cable PC600D
- DeWalt DWE1014
- DeWalt DWD520K
- Skil 6335-02
- Meterk 7 amp
- Makita 6407
- Porter-Cable PCE141
29 products considered. 900+ reviews analyzed, 36 research hours spent, 19+ info. sources referred
Corded drills are used by professional carpenters, DIYers and homeowners alike. They are an important tool for any handyman to have, and many won’t be able to complete their jobs without them.
However, not all corded drills are the same. While some may work better for professionals, DIYers and occasional users may need something else from their drill.
Infrequent users and those who simply need a tool in the house will also need something different than either professionals or DIYers.
This article is going to go over ten different corded drills that are currently available on the market.
Though at first glance they may all seem the same, each drill will have different specs and features that will set it apart from the others.
As you read this article it will ultimately be up to you, the reader and the buyer, to determine what drill works best for you.
Hopefully, by the time you’re done with this article, you’ll have seen a few drills that will do what you need it to do.
Comparison Table: Top Corded Drill Today
Here is a quick comparison table of key specs of top corded drill in the market today –
Product | Weight | Amperage | Chuck Size | Price |
---|---|---|---|---|
Black and Decker (DR260C) |
3.5lbs | 5.2A | 3/8 inches | Check Price |
DeWalt DWD115K |
6.5lbs | 8A | 3/8 inches keyless | Check Price |
DeWalt DWD210G |
4.9lbs | 10A | 1/2 inches keyed | Check Price |
Porter-Cable PC600D |
4lbs | 6A | 3/8 inches keyed | Check Price |
DeWalt DWE1014 |
1.77lbs | 7A | 3/8 inches keyed | Check Price |
DeWalt DWD520K |
3.66lbs | 10A | 1/2 inches | Check Price |
Skil 6335-02 |
5lbs | 7A | 1/2 inches keyed | Check Price |
Meterk 7 amp |
5.35lbs | 7A | 1/2 inches | Check Price |
Makita 6407 |
3.1lbs | 4.9A | 3/8 inches | Check Price |
Porter-Cable PCE141 |
4.9lbs | 7A | 1/2 inches | Check Price |
Reviews of the Best Corded Drill
These are ten corded drills that are currently available to purchase. As you read through the reviews, take note of which ones are best for you.
Black and Decker DR260C
Key specs:
- 3.5lbs
- 0-1,500 RPM range
- 3/8” keyless chuck
Stanley Black and Decker has a combined total of over 150 years of experience in power tool and hardware manufacturing. They provide products for car repair, home repair and road construction.
This drill is a good one for infrequent users who want a drill in the house. Although its 5.5-amp motor makes it moderately strong, it isn’t the strongest drill out there.
This may make it too weak for professionals and those that will be using their drill all the time.
However, because this is a drill that’s stronger than many, this drill may also be too strong for those inexperienced with drills.
- 5.5-amp motor
- Lightweight
- On-board bit storage
- Variable speed
- May be too strong for infrequent users
Homeowners may be happy with this drill, though those that need more power form their drill would want to look elsewhere.
Check Reviews & Price on Amazon
DeWalt DWD115K
Key specs :
- 6.5lbs
- 3/8” keyless chuck
- 8-amp motor
DeWalt has been around since 1924. It was restructured and re-branded as DeWalt, Inc. in 1947, and has been growing and expanding ever since.
This is another excellent drill for professional contractors and carpenters.
It has a powerful 8-amp motor that makes it stronger than other drills on the list, and its high-quality components make it a great choice for those who will be using it often.
Because this drill has an 8-amp motor, even stronger than the aforementioned Black and Decker BDEDMT, it may make it unappealing to less experienced buyers.
- Strong motor
- Soft grip
- High-quality ball bearing construction
- Too strong for infrequent users
Though infrequent users may be turned away by the strength of the drill, many hobbyists and professionals would be happy with a drill like this.
Check Reviews & Price on Amazon
DeWalt DWD210G
Key specs :
- 4.9lbs
- 1/2″ keyed chuck
- 10-amp motor
This drill is incredibly fast and strong. It comes with a 3-year warranty and an incredible 10-amp motor that make it excellent for professionals.
Serious DIYers may be happy with this tool as well, but it’s definitely not something that the average Joe would get much use out of.
In addition to its strong motor and high RPM, this drill comes with an ergonomic grip for maximum comfort as well as a 360-degree locking side handle.
- Can reach speeds between 0 and 1,200 RPM
- 3-year limited warranty
- Ergonomic grip
- Locking side handle
- Too strong for infrequent users
Though homeowners may be turned away by the incredibly strong motor, most who use their drill on a regular basis would be happy with this tool.
Check Reviews & Price on Amazon
Porter-Cable PC600D
Key specs:
- 4lbs
- 6.5-amp motor
- 3/8” keyed chuck
Porter-Cable is a producer and manufacturer of power tools such as drills and saws.
This drill is a good one for hobbyists and homeowners. The relatively strong 6.5-amp motor makes it great for projects and repairs, but perhaps not the best choice for professionals.
The high RPM range may make it appealing to some professionals, but those that need a strong motor could definitely do better.
Additional features, such as a lock-on button, also make it a great tool, although
- 0 – 2,500 RPM
- Lock-on button
- Lightweight
- May not be strong enough for professional use
This is a good drill that many would be happy with. Though not all will want a drill such at this, most would be happy with the specs.
Check Reviews & Price on Amazon
DeWalt DWE1014
Key specs:
- 1.77lbs
- 3/8” keyed chuck
- 7-amp motor
This relatively strong drill is great for hobbyists and DIYers. With a 7-amp motor and variable speed trigger, those that use their drill every so often for projects will be happy with this drill.
The motor may be too strong for some homeowners and too weak for some professionals, but its specs are right in the middle, meaning that some from all groups would likely consider this drill.
The drill is also extremely lightweight, weighing less than two pounds. This makes it a great tool for just about anyone to use. It’s also has a very high RPM limit.
- Relatively strong motor
- Extremely lightweight
- Variable speed trigger
- 0-2,800 RPM range
- May be too strong for some inexperienced users
- May be too weak for experienced users
With specs that are right in the middle, this is a drill that all should consider.
Check Reviews & Price on Amazon
DeWalt DWD520K
Key specs:
- 3.66lbs
- 1/2″ chuck
- 10-amp motor
This DeWalt drill is another good one for the professionals. The powerful 10-amp motor makes this a strong drill that is sure to stand up to any job and last a long time.
Specs such as a two-finger trigger, overload protection and DeWalt’s special motor design make this a truly strong drill that all carpenters and independent contractors should consider.
Of course, homeowners and those that barely use their drill won’t need one with such strength and with so many features. Infrequent users will want to look somewhere else.
- Soft grip handle
- Two-finger trigger
- Metal gear housing
- Overload protection
- Dual mode
- May be too strong for homeowners
An excellent drill for professionals, this DeWalt drill is something that all who drill daily should consider buying.
Check Reviews & Price on Amazon
Skil 6335-02
Key specs:
- 5lbs
- 1/2″ keyed chuck
- 7-amp motor
Skilsaw is a producer and seller of various kinds of saws, from table saws to benchtop to handheld.
This is another good drill for all to consider. With a strong 7-amp motor, it’s strong and comes with a keyed chuck designed for woodworking and cutting.
It also has extra specs such as a side assist handle and a variable speed trigger, further making this a great drill.
Because the motor isn’t terribly strong nor weak, some homeowners may be happy with it, as would some carpenters.
However, DIYers and those that use their drills on a semi-frequent basis would be the happiest with this drill.
- Strong motor
- Side assist handle
- Variable speed trigger
- May be too strong for some homeowners
- May be too weak for some professionals
This is another drill that all should think about buying. It’s a strong drill with many helpful specs and features.
Check Reviews & Price on Amazon
Meterk Corded Drill
Key specs:
- 5.35lbs
- 7-amp motor
- High RPM range
Meterk produces and sells a wide range of tools, from power tools to handheld.
Similar to other drills on this list, this Meterk drill is a relatively strong drill that many would be happy with.
With a 7-amp motor, it isn’t too strong nor weak, which means that carpenters who make a living off their work, as well as those who only use their drill when they need to, will be happy with this tool.
This drill also has extra specs and features such as an easy safe and control switch and the ability to reach up to 3,000 RPM
- Easy safe and control switch
- Strong motor
- Up to 3,000 RPM
- Maybe too weak for some professionals
- Maybe too strong for some homeowners
Though many will be happy with a drill like this, it won’t work for all, and the buyer must determine whether or not this is the right drill for them.
Check Reviews & Price on Amazon
Makita 6407
Key Specs :
- 3.1lbs
- 4.9-amp motor
- 3/8” clutch
Makita originally began as an electric motor sales and repair company that was founded in 1915. Since then, the company has made leaps and bounds in power tool manufacturing.
This drill is perfect for homeowners. It has a high RPM without being too much for the average Joe, and the 4.9-amp motor is strong without being too strong.
Because the amperage for the motor is a bit on the weaker side, professionals and likely some serious DIYers won’t want a drill such as this.
- 0-2,500 RPM range
- Large recessed lock-on button
- Large trigger handle switch
- Maybe too weak for some
A good drill for homeowners, this Makita drill is perfect for those who won’t be using their drill that often.
Check Reviews & Price on Amazon
Porter-Cable PCE141
Key specs:
- 4.9lbs
- 7-amp motor
- 1/2″ chuck
This drill is good for homeowners and DIYers. Though it has a 7-amp motor like many on this list, its lighter weight makes it more suitable for regular homeowners and those that aren’t accustomed to using drills all the time.
Its additional features like a pistol grip handle and cast metal gear housing make the drill easy to handle and likely to last for a long time.
As is the case with the other drills of similar amperage, this drill may be too strong or too weak, depending on who the buyer is.
- Strong motor
- Lightweight
- Pistol grip handle
- Cast metal gear housing
- Maybe too strong for some
- Maybe too weak for some
It’s greatly important that the buyer take into account their own needs and how often they use the drill. This tool may or may not be for them.
Check Reviews & Price on Amazon
Buying Guide for Best Corded Drill
As you read through this article you’ll see different corded drills with different specs and features. This section of the article will discuss what a corded drill is, the benefits of a drill, as well as a short section to help you determine what kind of buyer you are.
What is a Corded Drill?
As the name implies, a corded drill is a drill that runs on electric power, but uses a constant stream of energy as opposed to a battery.
What are the Benefits of a Corded Drill?
A corded drill, as opposed to a cordless drill, doesn’t need to rely on a battery to keep it charged. Because of this, the user doesn’t need to worry about the drill running out of power, or having to keep an extra battery around that has been pre-charged.
So long as the user is by an outlet, they can use the drill.
What kind of Buyer am I?
It’s important to determine what kind of buyer you are. By knowing what kind of buyer you are, you’ll be able to determine what you need in a drill.
I’m a contractor/professional carpenter…
If you’re doing to be using your drill for commercial purposes, you’re going to need a strong drill with a tough motor, high RPM to move at a fast speed, as well as some accessories to make it easier to use and carry around.
I’m a hobbyist/DIYer…
If you’re only going to be using you drill on occasionally, when a project arises, then you can get away with using a less-than-fancy drill that doesn’t have every single fancy feature that a drill can come with.
Those that won’t be using their drill every day won’t need a professional-grade drill.
I’m a homeowner…
If you’re going to be using your drill every so often, then you definitely won’t need a fancy drill. A basic drill that can handle several different materials and can handle going unused for long periods of time.
Final Words
Hopefully, you have a better idea of what you should look for in a drill. All buyers are different, and it’s important that you know what your needs are and what you should be looking for in a drill.
Good luck and happy shopping!
Here is the list of our top picks again for you. Check out the specs, customer reviews, price and offers on Amazon –
- Black and Decker (DR260C)
- DeWalt DWD115K
- DeWalt DWD210G
- Porter-Cable PC600D
- DeWalt DWE1014
- DeWalt DWD520K
- Skil 6335-02
- Meterk 7 amp
- Makita 6407
- Porter-Cable PCE141
Last update on 2021-03-08 / Affiliate links / Images from Amazon Product Advertising API