Best Drill Press Tables In The Market Today

In Brief: Best Drill Press Tables

  1. WEN DPA2412T
  2. Woodpeckers WPDPPACK1 Drill Press Table
  3. Woodstock D4033 Drill Press Table
  4. MLCS 9765 Drill Press Table
  5. Proxxon 27100 Micro Compound Table
How We Decided

13 products considered. 200+ reviews analyzed, 27 research hours spent, 10+ info. sources referred

More about our Methodology

Drill press tables are a great accessory to buy for your drill presses since they can significantly increase the area that you can work on.

They also come with a number of precision-boosting tools and handy tracks for mounting accessories that can enhance your drill press experience.

The 5 tables on this list have been chosen for their customer satisfaction, their quality, and their capacity to improve your user experience with your drill press.

A drill press table is a much-needed item in a workshop, and if you already have a drill press, then a good table can help make your cuts more precise, even when angled.

A good drill press table can make your life a whole lot easier by accommodating for larger pieces of material and getting more precise cuts with the ability to adjust the angle. No matter what type of work you do, you will need one of these.

This article will go over the various options out there and pick out the best of the best to choose from.

Comparison Table: Top Drill Press tables

Check out our quick comparison of the top drill press tables in the market today – 

ProductDimensionsPrice

WEN DPA2412T

WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

23-7/8" x 11-7/8" x 1" Check Price

Woodpeckers WPDPPACK1 Drill Press Table

Woodpeckers WPDPPACK1 Drill Press Table with 2 Hold Down Clamps

16" x 23" x 1" Check Price

Woodstock D4033 Drill Press Table

Woodstock D4033 Drill Press Table

23-3/4 " x 11-7/8" x 1" Check Price

MLCS 9765 Drill Press Table

MLCS 9765 Drill Press Table

12" x 24" x 1" Check Price

Proxxon 27100 Micro Compound Table

Proxxon 27100 Micro Compound Table KT 70

7.7" x 11" x 2" Check Price

Review of Best Drill Press Tables

WEN DPA2412T

WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

This drill press table comes with a sturdy design, featuring a 1-inch thick MDF board which is resistant to warping or wobbling to give you better accuracy.

Your accuracy is also boosted by onboard rulers that help you make precise and even cuts while the stop block on the fence allows you to center your workpiece.

The table provides you with a spacious workspace that measures 23-7/8 by 11-7/8 inches that can add up to 275 additional square inches of space for work on large projects.

The fence on the table is adjustable and slides back and forth so that it can fit any project. If you need to drill completely through your workpiece, the insert is easily removable for your convenience.

While designed with WEN drill presses in mind, it can fit the majority of drill presses between 5 and 16 inches on the market. The simple and easy to use mounting clamps on the table make installing any drill press a breeze.

PROS:
  • Large work surface
  • Onboard rulers for precision
  • Moveable fence with a stop block
CONS:
  • The clamp-down mechanism is weak because of low-quality screws

Check Reviews & Price on Amazon

Woodpeckers WPDPPACK1 Drill Press Table

Woodpeckers WPDPPACK1 Drill Press Table with 2 Hold Down Clamps

This is Woodpeckers’s new and improved drill press table designed for presses that are 12 inches or larger. It offers a 16 x 23 inches surface that is designed to fasten to slotted steel tables as well as T-slotted tables using a simple and easy interface board.

The edges of the table are protected with a highly durable, high-density banding which is permanently bonded to the MDF construction of the table.

The table itself has tear-out eliminating filler which can be easily adjusted to be level with the surrounding table. To reduce friction and make incremental drilling easier, the table is covered in a non-glare Micro-Dot laminate.

There are two double-wide T-Tracks embedded into the table with no possibility of pull out. These tracks are laser engraved to give you high-contrast, easy-to-read markings to indicate the fence position.

These tracks also give you access to more stop and accessory mounting options such as L stops and flip stops.

The 36-inch long fence itself can be adjusted both back to front and left and right without any tools.

It is engraved with a center type scale to make it easy to use and is locked into place with automatically aligning brackets for ease of use.

The product video for this model can be watched here:

 

PROS:
  • High-quality construction
  • T-Tracks for multiple mounting options
  • Powerful hold-down clamps and anchoring
  • Laser-engraved scales for accuracy
CONS:
  • The table can interfere with the height adjustment handles on certain drill presses

Check Reviews & Price on Amazon

Woodstock D4033 Drill Press Table

Woodstock D4033 Drill Press Table

This is a fairly straightforward drill press table with a 23-3/4 x 11-7/8 table for extensive support for larger drill presses. It utilizes a 3-inch high fence which comes with a stop block for better work support and more accuracy.

Both the fence and the stop slide along T-slots so that you can quickly yet securely adjust them.

It is designed to fit all standard drill press tables an includes two universal table clamps for mounting them.

Another compatibility feature is that the square center block is removable in case it gets in the way of complete through-drilling past the table.

PROS:
  • Inexpensive
  • Can accommodate drill presses of various sizes
  • Fence and stop slide work accurately
CONS:
  • The table itself is made of low-quality MDF
  • Clamps tend to pull out of the table

Check Reviews & Price on Amazon

MLCS 9765 Drill Press Table

MLCS 9765 Drill Press Table

This 12-inch by 24-inch drill press table from MLCS is made of thick MDF/Melamine for support and solidity along with an adjustable fence that gives you maximized holding power.

The table includes two T-Tracks for hold-downs as well as a removable insert that can be drilled to accommodate a standing drum of any side.

It is meant to be a universally mounting table and should fit almost all drill presses without any modifications.

In general, it should adapt to drill presses with parallel 9-5/8-inch parallel slots on center bolts. It can also clamp on tables that are less than 9-3/8 inches wide from the outside.

PROS:
  • Easy to install
  • Value for money
  • The fence is convenient to use and easy to remove
  • Flat and highly accurate
CONS:
  • Some users have faced issues with the clamps

Check Reviews & Price on Amazon

Proxxon 27100 Micro Compound Table

Proxxon 27100 Micro Compound Table KT 70

This is a more compact table than any of the other on the list and measures just 7-7/8 inches by 2-3/4 inches. Despite its smaller size, it has a durable construction made of surface-treated aluminum rather than wood or MDF.

It has 3 longitudinal T-slots and provides lateral and cross axis position through two adjustable dials that are graduate in 0.05mm increments for extremely fine-tuned control.

It also uses an adjustable ruler for accurate positioning of the cross slide.

PROS:
  • Good build quality
  • T-slots work smoothly
  • Highly precise due to the graduated dials
CONS:
  • The screws and clamps for attachment are not sturdy enough

Check Reviews & Price on Amazon

Buyer’s Guide for Best Drill Press Table 

Woodstock D4033 Drill Press Table

In this section, we will define what a drill press table is, why you should use one, and help you to determine what kind of buyer you are. Knowing what type of customer you are enables you to figure out which product is right for you, and the kind of work that you do.

What is a Drill Press Table?

A drill press table is a table designed to fit and work with a drill press to accommodate for larger pieces of material. A drill press table that can tilt will also allow for better angling when cutting, getting a wider range of motions.

Why a Drill Press Table?

A typical drill press comes with a small table that allows for smaller materials to be cut, and has less space. A drill press table allows for larger working materials because it is larger than what comes with the regular drill press.

What kind of Buyer are you?

Defining what type of buyer you are is important because it will help you to figure out which drill press table is right for the type of work you do.

If are someone that needs a professional grade product that can last through consistent use for jobs, then you know you’ll need something more heavy-duty and rugged. If not, then you can go for a more cost-effective option.

I am a Professional or Independent Contractor…

If you are someone that needs your drill press table to be able to last you through multiple jobs that you have to do, then you know that you’ll need something that is built to last through industrial use.

If you were to get cheaper, smaller option, it may not last as long as you need it to and you could end up needing a new one sooner than you think.

I am a Hobbyist or DIYer…

If you are someone that does projects around the house and wants a drill press table to work with every so often, then you can afford to go with a cost-effective option.

You only need something to last through occasional projects, not constant use, so you are able to choose something that won’t be out of your budget.

Plus, if you only use it every once in a while, then you won’t need something that is super sturdy. Instead, you can opt for a compact drill press table that won’t be expensive.

FAQs

Do I need a Drill Press Table if my Drill Press Comes with a Small one?

The answer is a bit of a yes, and no. It depends on what work you do, and what you will use it for. If you are a professional user for worksites like construction and woodworking, then you will want to get one because it will last longer, and accommodate for larger materials which you will frequently cut. However, if you are only using your drill press for a small amount of projects, then you may not need one. It is recommended to have a drill press table because they allow for more precise cuts.

Is there anything that I can do to make my Drill Press Table last Longer if I do a lot of Projects?

Yes, there are things that you can do to make it last longer. Proper care is always helpful in the maintenance of your tools, and it can help your table to last longer. You can also check if your drill press table has a double-layered surface. If so, then you can switch the top layer out when needed without having to resurface the entire table, or purchasing a completely new one.

What is a Drill Press used for?

A drill press can be used for a variety of drilling jobs. You can drill a typical circular hole, or it can be fitted with an attachment that allows for square holes to be drilled.

Final Words

With this information, I hope that we have given you some great drill press table options to choose from. In order to find which one is best for you, you have to know what you need.

This guide gives you the best options to start with so you can be sure that anyone you choose will give you the best value and the best drill press table for your needs.

While some people choose to build their own drill tables, you can’t beat the convenience of having one delivered to you.

The tables on this list give you access to new features, better precision, and come in a range of prices so that they remain a worthwhile investment for a long time.

Here is the list of our top picks again for you. Check out the specs, customer reviews, price and offers on Amazon – 

Last update on 2020-06-06 / Affiliate links / Images from Amazon Product Advertising API

Last Updated on

ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.