10 Best Hybrid Table Saws in Market Today

In Brief: Best Hybrid Table Saw

  1. Grizzly G0690
  2. Shop Fox W1824
  3. Shop Fox W1837
  4. Rockwell RK741S
  5. Shop Fox W1819
  6. Powermatic PM1000
  7. Laguna Tools Fusion
  8. Rigid R4512
  9. Woodtek 159665
  10. Grizzly Industrial G0833P
How We Decided

23 products considered. 200+ reviews analyzed, 32 research hours spent, 19+ info. sources referred

More about our Methodology

A hybrid table saw is an extremely useful tool used by carpenters and laymen alike to cut wood and help them accomplish all sorts of projects.

If you run any kind of carpentry side-business, are doing lots of DIY projects, or just have a knack for building and repairing things around the house, chances are you’re in need of a good table saw.

Despite hybrid table saws being a very unique, specialized kind of table saw – which this article will go more into detail about later – there are still things that set apart individual saws.

Some have more horsepower than others, while some have more RPM than others.

Some will be better suited for those running a small business and DIYers, while others will work bests for hobbyists who won’t be using their saw every day.

This article will discuss the positives and negatives to a hybrid table saw, as well as compare it to other kinds of table saws that are available on the market.

Hopefully once you’re finished with this article you’ll have a good understanding of what a hybrid saw can do, as well as have one or two saws in mind that you might consider buying.

Comparison Table: Top Hybrid Table Saws Today

Here is a quick comparison table with key specs of hybrid table saws available in the market –

ProductWeightRPMHorsepowerPrice

Grizzly G0690

Grizzly Industrial G0690-10' 3HP 220V Cabinet Table Saw with Riving Knife

530lbs 4300 RPM 3 HP Check Price

Shop Fox W1824

Shop Fox W1824 Hybrid Table Saw with Extension Table

380lbs 3850 RPM 2 HP Check Price

Shop Fox W1837

Shop Fox W1837 10' 2 hp Open-Stand Hybrid Table Saw

260lbs 3450 RPM 2 HP Check Price

Rockwell RK741S

Rockwell RK7241S Table Saw with Laser

88.2lbs 4800 RPM 2.5 HP Check Price

Shop Fox W1819

Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife

457lbs 4300 RPM 3 HP Check Price

Powermatic PM1000

Powermatic PM1000 1791000K Table Saw 30-Inch Fence

346.8lbs 4200 RPM 1.75 HP Check Price

Laguna Tools Fusion

LAGUNA TOOLS Fusion 36in. Rip 110 V

240lbs 4500 RPM 1.75 HP Check Price

Rigid R4512

RIDGID R4512 10 in. 13-Amp Cast IronTable Saw

267lbs 3450 RPM 2 HP Check Price

Woodtek 159665

Woodtek 159665, Machinery, Table Saws, 10' Left Tile 2hp Hybrid Table Saw, 52' Fence

225lbs Approx. 3450 2 HP Check Price

Grizzly Industrial G0833P

Grizzly Industrial G0833P - 10' 2 HP 230V Hybrid Table Saw with Riving Knife, Polar Bear Series

416lbs 3850 RPM 2 HP Check Price
 

Reviews of the Best Hybrid Table Saw

These are ten hybrid table saws available on Amazon. Though they vary in strength, they are all good saws that can get different jobs done, depending on what you need them for.

Hopefully after reading these reviews, you’ll have seen a couple of saws that you’ll consider buying.

Grizzly G0690

Grizzly Industrial G0690-10' 3HP 220V Cabinet Table Saw with Riving Knife

Key specs:

  • 4,300 RPM
  • 34” table
  • 3 HP

Grizzly Tools is a producer and seller of woodworking and metalworking tools ranging from arbor presses to power feeders.

This is a good tool for, as Rockler puts it, “serious hobbyists. With a solid RPM and 3 horsepower – higher than some other saws on this list – it’s a pretty strong saw.

With other specs such as a blade that can tilt and a riving knife, it’s a useful saw with many features.

On the downside, this is one of the heaviest saws on this list. With the whole unit weighing in at 530 pounds, it’s going to take multiple people to move this tool into your shop or workstation. Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch

PROS:
  • Quick release motor guard
  • Quick release riving knife
  • Easy-glide fence system
CONS:
  • Very heavy

This is a great saw for the serious hobbyist or small business owner. It’s a very versatile tool.

Check Reviews & Price on Amazon

Shop Fox W1824

Shop Fox W1824 Hybrid Table Saw with Extension Table

Key specs:

  • Low-friction composite extension table
  • Cast-iron trunnions
  • 3,850 RPM

Shop Fox, a subsidiary of Northern Tool and Equipment, is a brand that specializes in power tool and metal fabrication production.

This is another good tool for a hobbyist.

Not only is it a bit lighter than the aforementioned Grizzly G0690, it has features such a T-shaped fence and low-friction composite extension table, making it a very useful tool for hobbyists and occasional users.

On the negative side, this saw does seem to be a hard to find. Currently unavailable on some sites, it’ll take some googling before you find one. And it’s also somewhat heavy at almost 400 pounds.

PROS:
  • T-slot miter gauge
  • 2-year warranty
  • T-shaped fence
CONS:
  • Hard to find
  • Rather heavy
  • Slightly lower horsepower

This is a rather good tool for occasional users. It has many features and a fairly strong motor.

Check Reviews & Price on Amazon

Shop Fox W1837

Shop Fox W1837 10' 2 hp Open-Stand Hybrid Table Saw

Key specs:

  • Steel wings on table
  • Rear-locking fence
  • 3,450 RPM

This is another good saw for hobbyists. The lightest on the list so far, this one is a bit easier to move into your workstation, and has lots of good features such as a dust port, an adjustable fence and a large rip capacity, making it an excellent saw.

However, similar to the Shop Fox W1824 saw on this list, the W1837 has two horsepower, which is lower than some others on this list.

Those that maybe use their saw pretty often, or need a lot of power from their saw may want to look elsewhere.

PROS:
  • 4” dust port
  • Lift-off fence
  • Large rip capacity
CONS:
  • Slightly lower horsepower
  • Lower RPM

This is a good saw for some users, but carpenters that need a bit more kick and horsepower from their saws many not like this one.

Check Reviews & Price on Amazon

Rockwell RK7241S

Rockwell RK7241S Table Saw with Laser

Key specs:

  • 4,800 RPM
  • Laser indicator
  • Trolley stand

Rockwell Tools is a vendor of saws, oscillating tools and other power tools.

This saw is another especially strong saw on the list. With high RPM and useful features like a laser indicator and a foldable fence, this is one that business owners should think about.

Those that use their saw frequently should definitely consider this saw.

On the downside, this does have a limited warranty, so inexperienced users may have to be a bit more careful as the warranty may not cover all damage.

The saw also rests on legs instead of a sturdy cabinet, which may be an awkward setup for some.

PROS:
  • Large cutting depth
  • Folding fence
  • Lighter weight
CONS:
  • Limited warranty
  • No cabinet; sits on metal legs

Another good hybrid saw, this is one that business owners should think about getting.

Check Reviews & Price on Amazon

Shop Fox W1819

Shop Fox W1819 3 HP 10-Inch Table Saw with Riving Knife

Key specs:

  • 4,300 RPM
  • Easy glide T-fence system
  • 3 HP

This Shop Fox saw is another strong saw on the market. With a lot of horsepower and an easy-glide system, this saw is strong and easy to use.

It also comes with extra features like a magnetic switch and a thermal overload protection, this makes it a versatile tool that frequent users will get a lot of use out of.

However, at 457 pounds that makes it a heavy saw. While that won’t bother most, the weight might pose a challenge to get it into your workstation, and will be tough to move around.

PROS:
  • Adjustable T-slot miter gauge
  • Quick release riving knife
  • Magnetic switch
  • Thermal overload protection
CONS:
  • Rather heavy

This is a very good saw. With a high RPM and lots of features, this is a saw that business owners and hobbyists will get lots of use out of.

Check Reviews & Price on Amazon

Powermatic PM1000

Powermatic PM1000 1791000K Table Saw 30-Inch Fence

Key specs:

  • 4,200 RPM
  • Pivoting miter gauge
  • 1.75 HP

Powermatic is a manufacturer of woodworking machines, tools and accessories such as band saws, dust collectors and dovetail machines.

This is another relatively strong saw. With 4,200 RPM and an enclosed cabinet, this is one that business owners and serious hobbyists should think about.

On the downside, the horsepower is on the lower side, with most of the other saws on this list being 2 HP or higher. This may be a problem for those who need more from their saw.

PROS:
  • Doesn’t require much power
  • Tool-free assembly
  • Lightweight
  • 5-year warranty
CONS:
  • Low horsepower

Aside from those who need lots of horsepower from their saw, this saw is a great tool for many.

Check Reviews & Price on Amazon

Laguna Tools 36” Fusion

LAGUNA TOOLS Fusion 36in. Rip 110 V

Key specs:

  • 4500 RPM
  • 1.75 HP
  • 240 pounds

Laguna is a manufacturer of both traditional and automated machinery such as table saws and routers.

This is a good tool for those who need a table saw in the house for occasional repairs or projects.

Though serious hobbyists or carpenters running a small business will likely want a saw with more horsepower, this tool will get the job done for many.

As mentioned above, this saw does have lower horsepower than most other saws on the list. As such, those that make money off what they make, or need their saw for many projects, will probably want a stronger saw.

PROS:
  • Quick release riving knife
  • Dustless cabinet design
  • Lighter weight
CONS:
  • Weaker horsepower

Though businesspeople might want a saw with more horsepower, most will be satisfied with a saw like this.

Check Reviews & Price on Amazon

Ridgid R4512

RIDGID R4512 10 in. 13-Amp Cast IronTable Saw

Key specs:

  • 3450 RPM
  • 267 pounds
  • 2 HP

Ridgid is a producer of jobsite tools for purposes such as wet/dry vacuuming, drain cleaning and pipe fabrication.

The R4512 is one of the slower saws on this list, making it great for those who won’t be using their saw often, or don’t need it for big projects.

With a low RPM and moderate motor horsepower, this is one saw that hobbyists and occasional users should consider.

However, as stated before, this saw has low RPM and a modest horsepower level. That means that more serious hobbyists and those that use their saw for a business may want an even stronger saw.

PROS:
  • Slots for auxiliary fences
  • Cast-iron table to minimize vibration
CONS:
  • Not for big projects or frequent users

Though it isn’t the fastest saw on the list, this is a fairly strong saw that many would get use out of.

Check Reviews & Price on Amazon

Woodtek 159665

Woodtek 159665, Machinery, Table Saws, 10' Left Tile 2hp Hybrid Table Saw, 52' Fence

Key specs:

  • Approximately 3,450 RPM
  • 2 HP
  • 225 pounds

Woodtek, a brand of Woodworker’s Supply, is a manufacturer and vendor of countless tools and accessories such as aprons, clamps and hand tools.

This saw is another fairly strong saw. At 2 horsepower, it’s stronger than some other saws on this list, and at 225 pounds, it’s much lighter than many of the saws mentioned in the article.

It also has an extendable table to cut larger materials.

On the negative side, because it has a lower horsepower it may not be for everyone. Business owners who want a bit more strength from their saw.

PROS:
  • Extendable table
  • Quite strong
  • Lightweight
CONS:
  • Legs can be wobbly
  • Hard to move around

A good saw for frequent users, many would be happy with a saw like this.

Check Reviews & Price on Amazon

Grizzly Industrial G0833P

Grizzly Industrial G0833P - 10' 2 HP 230V Hybrid Table Saw with Riving Knife, Polar Bear Series

Key specs:

  • 3850 RPM
  • 2 HP
  • 416 pounds

The Grizzly G0833P is another solid saw. Besides having 2 horsepower it’s relatively strong, and even though it’s lower than many saws on this list, 3,850 RPM is still quite a bit of speed.

It also has lots of specs like a T-slot miter gauge and a 4-inch dust port, making it even more useful.

However, like several other saws on this list, this saw weighs in at over 400 pounds, making it a bit heavier and potentially tough to move around. Grizzly Industrial G0833P - 10" 2 HP 230V Hybrid Table Saw with Riving Knife, Polar Bear Series

PROS:
  • 4” dust port
  • T-slot miter gauge
  • Cabinet-mounted trunnions
CONS:
  • On the heavier side

Though it’s not the lightest saw on the market, it still has a good amount of horsepower and a fairly high amount of RPM.

Check Reviews & Price on Amazon

Buying Guide for Best Hybrid Table Saw

Buying Guide for Best Hybrid Table Saw

When purchasing a power tool, especially one as expensive and powerful as a hybrid table saw, it’s important to know not only what a hybrid saw is and what it’s capable of, but what specs to look out for when buying one.

What is a Hybrid Table Saw?

Chances are you already know what a hybrid table saw is, you just didn’t know that’s what they were called. Hybrid table saws are workstations that essentially have a circular saw blade attached to a portable metal table. This makes it easy for carpenters and other tradesmen to cut pieces of wood or tile.

What sets a hybrid saw apart from other saws is the fact that it’s essentially a cross between a cabinet maker’s saw and a contractor’s saw, as Mattias Wandel explains.

It has similar designs to a contractor’s saw while still having the outward appearance of a contractor’s saw.

It has “enclosed housing” for dust collection, the motor is hidden as opposed to hanging out of one side of the cabinet, and the saw is meant to stay put instead of being moved to jobsites.

According to both Wandel and an article by Rockler, these saws are usually meant for hobbyists, especially because of their lighter weight.

This makes them ideal for DIYers and those that are using them occasionally for a side business.

What would you Need a Hybrid Table Saw for?

As mentioned before, hybrid table saws are ideal of hobbyists and DIYers. Those that make furniture for a bit of side money, or are constantly crafting new pieces for their home and for friends, will love a hybrid table saw.

They aren’t heavy and clunky like a cabinet saw, and they’re firmer and sturdier than a portable jobsite saw. They’re also as tough as a contractor’s saw without the downsides of a contractor’s saw.

Hybrid table Saw Versus Other kinds of Table Saws

Why should you consider a hybrid table saw? If you’re a DIYer who will be using their saw frequently, why not just get a tougher saw? This section will discuss why hybrid table saws are just as smart purchase as any other kind of saw.

Contractor’s Saws

Wandel mentions in his video that the inner workings of a hybrid saw are very similar to a contractor’s saw. What sets them apart are design differences.

Not only are hybrid saws a bit more compact, but the motor of a hybrid is most often placed inside the cabinet, instead of hanging out the side of the cabinet, as is the case with many contractor’s saws.

Cabinet Maker’s Saws

Cabinet maker’s saws (also called cabinet saws), as mentioned in Rockler’s article, tend to have larger motors that are easier to set up and are very strong and accurate.

Though these saws have a lot of pros, they tend to be super expensive and extremely heavy, making them hard to move without a forklift or dedicated team – which means that it’s quite hard for the Average Joe to acquire one.

Jobsite Saws

As the name implies, jobsite saws are portable table saws meant to be used on jobsites. They’re lightweight and built somewhat similarly to a cabinet saw.

On the downside, these saws many not be as precise or work quite as well as other kinds of table saws.

Why Hybrid Saws?

Hybrid saws, as Rockler’s article goes on to say, takes a lot of the positive aspects of a contractor’s saw, improves upon the design of a cabinet saw, while being lightweight and easy to move around.

In addition, they’re usually built to work with regular outlets and take up the same amount of power as any other power tool.

Some Specs and Terms to Look out for

RPM

Standing for ‘revolutions per minute’, RPM shows speed, Jon Eakes writes in his power tool blog. RPM shows how fast a saw can cut wood, combined with the strength of the motor and type of saw blade (including how many teeth the blade has).

Horsepower

Or ‘HP’ for short, horsepower is a unit of measurement referring to the strength of the motor, How Stuff Works explains. The higher the horsepower, the stronger a motor is (and, potentially, how much power it requires).

Miter gauge

Dummies.com explains that miter gauge is a tool that guides the wood that you push toward the saw.

Final Words

Hopefully this article has been helpful in providing you information on hybrid table saws. As with any big purchase – and especially when it comes to purchasing expensive power tools – it’s important to take your needs into account.

If you are a business owner or DIYer, you’ll have different needs than a hobbyist or occasional user.

Make sure to carefully look over the specs and features of each saw, and see which one will work best for you. Each one will have its pros and its cons, so keep that in mind while perusing Amazon. Happy shopping!

Here is the list of our top picks again for you. Check out their specs, reviews, price and offers on Amazon –

 

Last update on 2019-12-14 / Affiliate links / Images from Amazon Product Advertising API

Last Updated on

ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.

      error: