10 Best Miter Saw Blades in Market Today

In Brief: Best Miter Saw Blades

  1. DEWALT DW3128P5
  2. Makita A-93681
  3. Freud D12100X
  4. Freud LU91R012
  5. Concord Blades WCB1000T080HP
  6. IRWIN Tools MARATHON
  7. Freud P410T
  8. Hitachi 115435
  9. Forrest CM12806115
  10. INGTERCO 10-Inch 60-Tooth
How We Decided

24 products considered. 500+ reviews analyzed, 31 research hours spent, 17+ info. sources referred

More about our Methodology

You can have the best miter saw that money can buy but if you use a low-quality blade, you’re still not going to see results.

This is a problem many users face when they purchase a new miter saw and get sent a blade by the manufacturer that generally isn’t very quality.

Rather than have a single blade ruin your work, it’s a good idea to invest a bit more to get a high-quality one that’ll last a long time while also giving you precision and smooth functioning.

Even though this might seem excessive, especially if you’ve just spent a lot on buying a new saw, it’ll prevent a lot of problems later on.

The options on this list don’t require you to break the bank to buy another bit of gear. There’s everything from $20 options to professional-grade blades that cost upward of $100 for the highest quality work.

Comparison Table: Top Miter Saw Blades

Here is a quick comparison table of key specs of top Miter Saw Blades in the market today –

ProductInchTeethMaterialPrice

DEWALT DW3128P5

DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack

12" 80 Tungsten Carbide Check Price

Makita A-93681

Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade

10" 80 Micro- Grain Carbide Check Price

Freud D12100X

Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites, 12-Inch

12" 100 High Density Carbide Check Price

Freud LU91R012

Freud 12' x 72T Thin Kerf Sliding Compound Miter Saw Blade (LU91R012)

12" 72 High Density Carbide Check Price

Concord Blades WCB1000T080HP

Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

10" 80 Titanium Carbide Check Price

IRWIN Tools MARATHON

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 60T (14074)

10" 60 Carbide Check Price

Freud P410T

Freud 10' x 40T Thin Kerf Premier Fusion General Purpose Blade for Crosscuts (3/8' to 3-1/2') & Rips (3/4' to 1-1/2') wood, laminate, veneered plywood, hardwoods & melamine. (P410T)

10" 40 TiCo Carbide Check Price

Hitachi 115435

Hitachi 115435 10” 60T Fine Finish VPR Miter Saw Blade (Discontinued by the Manufacturer)

10" 60 Tungsten Carbide Check Price

Forrest CM12806115

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

12" 80 Carbide Check Price

INGTERCO 10-Inch 60-Tooth

INGTERCO 10-Inch 60-Tooth ATB Thin Kerf General Purpose Woodworking Saw Blade with 5/8-Inch Arbor

10" 60 Titanium Carbide Check Price
 

10 Best Miter Saw Blades

DEWALT DW3128P5 Blade Pack

DEWALT DW3128P5 80-Tooth 12 in. Crosscutting Tungsten Carbide Miter Saw Blade - 2 Pack

These blades by Dewalt is meant for 12-inch miter saws. They are made of tungsten carbide so that they stay sharp even after extended use.

Both the blades have a computer-balanced design for the plate that not only gives the blades a cleaner finish but also improves their accuracy while reducing vibration.

Another design feature is their exclusive wedge shoulder that puts more steel behind each tip so that the tips are more durable and remain accurate for longer.

The thin-kerf design also makes them faster and smoother and their anti-stick coating ensures that friction is kept to a minimum.

The pack consists of 2 blades: one with 80 teeth and the other one with 32 teeth. The one with 32 teeth is great for combination use and can tear through thicker material while the 80-teeth version gives you precision cuts.

PROS:
  • Excellent price for 2 blades
  • Thin kerf for more accurate cuts
  • Made of tungsten carbide with special wedge shoulder design for durability
  • Computer-balanced design gives more accuracy and reduced vibration
CONS:
  • A few people experienced problems with the 80T blade causing some splintering

Check Reviews & Price on Amazon

Makita A-93681

Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade

This is a 10-inch x 5/8 inch miter saw blade that is made of fully-hardened steel that is meticulously hand-tensioned to give you the best possible cuts.

The 80T design consists of micro-grain carbide teeth that are honed for a perfect mirror finish with up to 60 grit for precision.

They are arranged in an ATAF (Alternate Top and Alternate Face) design that gives you much sharper cutting as well as a more pointed edge.

The blade also has an ultra-thin carbide-tipped Japanese kerf construction that gives you precision cutting with reduced material loss and minimal drag on the motor.

The blade is excellent for fine crosscutting and works best with hardwood, softwood, and plywood.

PROS:
  • Very fine kerf for precision
  • Carbon-tipped teeth for durability
  • Inexpensive
  • ATAF layout for teeth for sharper, more pointed edge
CONS:
  • Might not be up to continuous heavy-duty use

Check Reviews & Price on Amazon

Freud D12100

Freud D12100X 100 Tooth Diablo Ultra Fine Circular Saw Blade for Wood and Wood Composites, 12-Inch

This is a 12-inch blade by Diablo that is made of Diablo’s TiCo Hi-Density carbide that is specially designed to increase performance and durability.

With this construction, it can cut fine molding, hardwoods, softwoods, veneered plywood, melamine and more.

A lot of the design features of this blade are focused on the finish of the cut. For example, it has a double-side grind tooth geometry that gives you polished finishes that are equivalent to that of 220-grit sandpaper.

This geometry is combined with the axial shear-face grind design that lets you shear through material cleanly and gives you a superior quality finish. The 100 teeth also ensure that your cuts are extremely fine.

The blade itself has a unique laser-cut, ultra-thin kerf that makes it stand out among blades by other manufacturers.

This laser-cut construction makes cuts far more effortless so that there is a reduced amp draw on the motor as well as less material waste so that you can maximize the performance of your saw.

The design also includes stabilizer vents that reduce noise and vibration and prevent sideways movement for greater precision.

You can see a product video for this blade here:

PROS:
  • Very durable
  • The 100T design makes it extremely sharp and efficient
  • Gives polished finish equivalent to 220-grit
  • Cuts are very clean and smooth
  • Laser-cut thin kerf for reduced material waste and amp draw on the motor
CONS:

Check Reviews & Price on Amazon

Freud LU91R012

Freud 12' x 72T Thin Kerf Sliding Compound Miter Saw Blade (LU91R012)

This 12-inch, 72T blade by Diablo, with a 1-inch arbor, has tips made with their signature TiCo high-density carbide crosscut blend.

This makes the blade extra-rigid and corrosion and heat-resistant while giving the teeth greater edge retention so that they last longer.

Another unique feature of the teeth is the alternating top bevel (ATB) configuration with negative hook angles. This angle ensures that the blade isn’t too aggressive that removes less material while also giving you a smoother cut.

It has an ultra-thin kerf which gives it a well-balanced construction that includes laser-cut anti-vibration slots that give you cleaner finishes and less noise.

It is also a fairly sturdy blade that won’t warp or bend and comes with a non-stick coating that minimizes friction and hence eliminates heat build-up, thus protecting both your tool and your work surface.

This also leads to less motor stress.

The blade is ideal for crosscutting materials 0.5 inches to 2.75 inches thick and is recommended for use with chipboard, plywood, and laminate as well as for ripping wood. It is not recommended for non-ferrous materials.

PROS:
  • Cuts smoothly and without chipping
  • Negative hook angle is good for radial arm saws and gives better control
  • Anti-friction coating to eliminate heat build-up
  • Causes less motor stress
  • TiCo high-density carbide tipped teeth have greater edge retention and longevity
CONS:

Check Reviews & Price on Amazon

Concord Blades WCB1000T080HP

Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade

This blade by Concord is an excellent general-use woodcutting blade. It is excellent for ripping, crosscutting, and finishing for both softwoods and hardwoods in a wide range of thicknesses.

You can even use this blade for cutting plywood, wood framing, and decking.

It is a 10-inch, 80T variety that has professional, construction-grade quality so that it can handle a speed of up to 5500RPM.

It has an extremely thin kerf, with a 5/8th-inch arbor, that gives you a smooth finish and minimal material waste while cutting.

The tooth design is an ATB (Alternate Top Bevel) grind and has a lower hook angle to render an improved surface quality to the cut and increase the feed pressure.

PROS:
  • Smooth cuts with virtually no tear out
  • Inexpensive
  • All-purpose and versatile blade
CONS:
  • Will dull quickly with laminates
  • Some users complained of overheating and burning

Check Reviews & Price on Amazon

IRWIN Tools MARATHON

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 60T (14074)

Irwin Tools’ Marathon blades refer not to a single blade but instead to an entire series that encompasses 8 ¼ -inch, 10-inch, and 12-inch blades with varying teeth, arbors, and kerfs.

Despite the varying kerfs, they are all ultra-thin which results in more cuts with a lower power draw, which is particularly useless for cordless tools.

They are all precision-tensioned and balanced so that they give optimal performance for miter saws. The cuts are accurate and have a smooth finish.

The blades also have 400-grit diamond-ground teeth made of construction-grade carbide. These teeth have aggressive hook angles that cut through materials quickly yet cleanly.

Depending on your needs, you can choose the blade with the current number of teeth for you. For instance, the 100T blades are good for laminates, plywood, cement board, and plasterboard while 60T is better suited to plywood or melamine.

PROS:
  • The range is suitable for many different materials
  • Inexpensive
  • Ultra-thin kerf
  • Carbide teeth with aggressive hook angles for fast and clean cuts
CONS:
  • There are complaints about its longevity since it can dull quickly

Check Reviews & Price on Amazon

Freud P410T

Freud 10' x 40T Thin Kerf Premier Fusion General Purpose Blade for Crosscuts (3/8' to 3-1/2') & Rips (3/4' to 1-1/2') wood, laminate, veneered plywood, hardwoods & melamine. (P410T)

This blade by Diablo is meant for 10-inch miter saws and is a great general-purpose option. It is particularly good with crosscuts from 3/8 inch to 3.5 inches as well as ripping wood.

The materials it works best on are laminates, melamine, veneered plywood, hardwoods, softwoods, and thick stock lumber.

What makes it so versatile is the design the new Trio Fusion Tooth design that combines a 30-degree Hi-ATB (Alternate Top Bevel) tooth with an axial shear face grind and a unique double side grind tooth geometry.

This ensures that your cuts have a polished finished and that the material offers you minimum resistance.

There are laser-cut anti-vibration slots present on the blade which drastically reduce vibration and sideways movement in the cut. This extends your blade life and gives you a splinter-free cut.

As with other Freud blades, this one is also made of TiCo hi-density carbide that is specially manufactured to maximize performance and ensuring long-lasting sharpness for your blade.

It is finished with Freud’s Perma-Shield non-stick coating. This reduces blade drag, protects the blade from corrosion and pitch build-up, and minimizes friction and heat.

You can see how well this blade performs here:

PROS:
  • Gives you an extremely smooth cut
  • Anti-vibration design
  • TiCo hi-density carbide construction for edge retention
  • Non-stick coating prevents blade drag, corrosion, pitch, and heat build-up
CONS:
  • Tends to dull faster with hardwoods
  • Can cause burning of hardwoods

Check Reviews & Price on Amazon

Hitachi 115435

Hitachi 115435 10” 60T Fine Finish VPR Miter Saw Blade (Discontinued by the Manufacturer)

This is a 10-inch, 60T blade by Hitachi that is ideal for hardwood, softwood, plywood, high-quality finish lumber, and MDF. It can even work with OSB. The blade can be used for ripping, crosscuts, and other cutting needs.

The blades are made with precision tensioning and balancing that reduces blade vibration, allowing them to work at speeds up to 5800RPM.

However, most of the innovation of these blades is concentrated on the tungsten carbide tips which are carefully welded to each blade tooth using computerized technology for exactness and uniformity.

An automated grinding process is used to give accurate ATB (Alternate Top Bevel) tip geometry which increases the life of your blade. The tungsten-carbide used is of a micro grain variety that provides extreme durability.

The tips feature tri-metal brazing that allows them to withstand impacts so that they don’t get bent or worn out easily.

The large design of the teeth also means that they can be professionally resharpened so that you can reuse the blade.

The blade also has an electroplated coating to protect it from corrosion and laser-cut expansion slots that reduce vibration and noise as well as minimize heat build-up.

PROS:
  • Inexpensive
  • Good for making fine cuts
  • Teeth can be professionally resharpened
  • Laser-cut expansion slots for lower vibration, noise, and heat
CONS:
  • Not suitable for very precise professional work

Check Reviews & Price on Amazon

Forrest CM12806115

Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor

This 12-inch, 80T blade by Forrest is part of their Chopmaster range of blades for miter saws. The blade is made with double-hard C-4 submicron carbide that gives a life that is longer by up to 3 times that of blades using regular carbide.

It has an extremely thin kerf, at less than 1/8th of an inch with a 1-inch arbor.

The blade is heavier than normal steel plates which helps it maintain much greater stability so that you get a more even cut. Each blade is hand-straightened to a runout of .001/.002 to give you the highest quality performance.

The teeth feature a 30-degree ATB (Alternate Top Bevel) style that produces steady, clean cuts and eliminates both bottom and top splintering, particularly on ply veneers.

It also has a 5-degree negative face hook that ensures that the rigidity of the blade remains at an optimal level for cutting.

PROS:
  • Very thin kerf to make the finest cuts
  • Leaves smooth, polished-looking cuts
  • Doesn’t flex and maintains rigidity
  • Can be resharpened multiple times
  • Eliminates tears and splintering
CONS:
  • Very expensive

Check Reviews & Price on Amazon

INGTERCO 10-Inch 60-Tooth

INGTERCO 10-Inch 60-Tooth ATB Thin Kerf General Purpose Woodworking Saw Blade with 5/8-Inch Arbor

Ingterco’s 10-inch, 60-tooth blade is a great choice for ripping and cross-cutting functions.

It is a heavy-duty blade that has an ATB (Alternate Top Bevel) and left top bevel design so that you get better cutting through hardwood, softwood, abrasive wood, and veneered plywood.

It features decreased thickness for the kerf and the overall plate which helps stabilize is while also keeping it fast enough for smooth cuts.

This design gives it reduced kickback and enables it to work at a speed of up to 6000RPM, which is a higher capacity than any of the other blades on this list.

The tips are made of durable titanium carbide so that you get a long-lasting product with razor-sharp cuts.

The blade is also covered with a non-stick coating which is meant to reduce friction and heat build-up. It also protects the blade from corrosion and resin build-up.

PROS:
  • Inexpensive
  • Makes smooth cuts with no splintering
  • Can take speeds of up to 6000RPM
  • Long-lasting
CONS:
  • A few people had issues with installing it in their saws due to sizing issues

Check Reviews & Price on Amazon

You might not realize this yet, but having the best miter saw blade makes all of the difference in the world for your woodworking projects. The reason for this is that not all miter saw blades were created equal.

Different types of saw blades work best in different situations. We know there are several options out there for miter saw blades, so we are here to help you determine how to select the best miter saw blade for your situation.

How to Purchase the Best Miter Saw Blade

How to Purchase the Best Miter Saw Blade

When purchasing the best miter saw blade keep these factors in mind size, blade material, design, durability, and saw blade types.

When you are considering the best miter saw blade for your miter saw the first thing you need to figure out is what kind of miter saw you own.

You need to determine if you have a sliding miter saw or a stationary one to select the best blade for the saw you will be using.

When considering miter saw blades always check the surface of the saw blade or the packaging to ensure it is the correct option for your exact saw as sometimes these blades are interchangeable with other saws.

Size

The first thing you need to figure out when purchasing the best miter saw blade is the size of blade that you need. Miter saw blades come in four different sizes 7 1/2, 8 ½, 10, and 12 inches.

Using the wrong size blade can create a lot of problems, but most miter saws have a safety in place to prevent using the wrong blade size. You need to double check to see what size blade your miter saw requires before purchasing.

Blade Material

When it comes to miter saw blades you have three common types to choose from, as well as a few specialty blades. For this article we are just going to talk about the most common types of blades used with woodworking projects.

You have high-speed steel, steel, and carbide-tipped miter saw blades. Carbide-tipped blades are the most expensive option, but they will last longer than other blades, plus they produce accurate cuts and smooth finishes.

A steel blade is the most affordable and is great for soft woods. If used on harder woods they will dull quickly. High-speed steel blades are a versatile blade that works at a higher speed than steel blades.

The higher speeds allow the blade to last longer before becoming dull.

Design

The design of the blade is also an important factor to consider when purchasing a blade. The number of teeth in the blade determines how well it cuts through various materials.

The higher the teeth count the finer and more accurate the cuts are. Thickness of materials plays a role in the number of teeth you want in a blade, as the thicker materials do better with fewer teeth.

Blade thickness also plays a role in blade design, most blades are 1/8 inches thick, but if you need a fine finish cut you want to opt for a thin-kerf blade.

Teeth design should also be considered, as simple teeth are easier to sharpen and in general are easier to maintain.

Durability

You need a blade that is durable to ensure that it lasts for more than one use. Look for blades that are4 made from high quality materials.

The better the material of the blade the longer it will last, which means it will stand up to repeated use without sacrificing the consistency of the cuts.

The better the blade the more materials you can cut through without having to work hard to make the cut.

Saw Blade Types

You need to understand that there are several different ty6pes of miter saw blades available to choose from and we are not talking about what type of material they are made from.

The various types of blades are used for various cuts you are making. The right saw blade for your needs will depend greatly on the project you are working on.

Here is a quick look at the types of miter saw blades and what they are used for.

  • Reciprocating saw blades – used in reciprocating saws to cut things like drywall, metal, and wood.
  • Circular saw blades – can be used in miter saws and is ideal for tilting work. These blades can be used to cut metal, wood, and masonry.
  • Fine cut blades – if you need to make cuts in things like laminated chipboards or plywood or any other material where you need a fine cut these are the blades you want.
  • Coarse cut blades – for cutting both and hard and soft wood, as well as boards that do not require a fine finish.
  • Very Coarse Blades – these are ideal for use on thick and hard materials you are trying to cut through, such as bricks, metal, etc. Why a Good Blade is Essential

A good blade is essential if you want to make smooth and safe cuts for your woodworking projects. If you are doing any kind of cutting with your miter saw the last thing you want is choppy, rough, or inaccurate cuts.

Poor performance is often due to the woodworker not having experience, but in some cases poor results are the fault of the woodworker using an inferior or even a mediocre blade.

If you are going to invest in the best miter saw you also want to invest in the best miter saw blade.

Using a good blade is essential in any saw as it provides you with smooth and safe cuts regardless of the material you are cutting. A good blade doesn’t have to be the most expensive blade on the shelf, but it definitely isn’t the cheapest.

When it comes to your miter saw a blade a good blade is going to depend on what material you are cutting, what kind of cuts you are trying to make, and what your end goals are.

When choosing a good blade you need to consider the thickness of the blade, what the blade is made from, and the teeth design of the blade.

Each of these factors plays a role in determining how well the blade will work for a specific project.

How to Clean your Miter Saw and Blade

How to Clean your Miter Saw and Blade

To prolong the life of your miter saw and blades they should be thoroughly cleaned after each use.
To clean your miter saw you will want to remove all dust and debris from the saw after you are done using it.

The saw and blade should be cleaned after each use, not after the project is finished. To clean the miter saw use compressed air to blow out and dust and debris in hard to reach places.

Carefully wipe down the rest of your miter saw with a clean cloth. If you use a damp cloth to clean your saw make sure you use a dry cloth after to prevent any rust issues.

The table should be cleaned the same way you clean your saw.

The blade also needs to be cleaned, as it’s the most important part of the saw. A dirty and ill-cared for blade is not as efficient as a clean and well-cared for blade.

To clean the blade you will need to use a brush to dust off any particles or debris. Once all dust and debris has been removed with the brush apply some cutting oil to the blade with a clean cloth.

Oil should be applied in a circular manner and applied carefully so as not to cut yourself on the sharp blades.

Can you Sharpen Your Miter Saw Blade?

Yes you can sharpen your miter saw blade by following the steps indicated in the instructions of your sharpening tools.

With regular use even the best miter saw blade is going to grow dull. A dull blade isn’t very efficient and creates horrible looking cuts. For the best results you want to use a nice, sharp blade for your cuts.

If you notice your blade is becoming dull the best thing you can do is either replace the blade or sharpen the blade.

If you are going to sharpen the blade to save a little bit of money you have two choices you can sharpen it yourself or you can send it to a professional.

To sharpen the blade yourself you must first take the blade off the miter saw. Once the blade is off and clean you can begin using the sharpening tools to sharpen the blade.

Always follow the directions that come with the tools and work slowly and carefully to prevent any injuries.

FAQs

Are more teeth on a miter saw blade better?

More teeth on a miter saw blade doesn’t always mean better. The number of teeth on the blade plays a big role in the appearance and type of cut you are making. The more teeth a blade has the slower the feed rate, so you end up with a smooth, finished cut.

Can I use a circular saw blade on my miter saw?

The answer to this question is yes you can. The reason for this is a circular saw blade is designed for use with miter saws, as well as other saws.

Can I use a 10 inch blade on a 12 inch saw?

No you cannot use a 10 inch blade on a 12 inch saw. The general answer is no, as the 10 inch blade is built and designed for a 10 inch saw. The blade slots on a 12 inch saw will not line up properly with a 10 inch blade. The circular slot in the center of the blade is also smaller on a 10 inch than a 12 inch.

Can a miter saw blade cut through metal?

If you are using the right kind of miter saw blade you can use your miter saw to cut through a variety of metals. Carbide-tipped blades are best for aluminum as they provide a nice finish. The more metal you cut through the faster the blade will wear out.

Final Words

Miter saw blades vary a lot: the kerf, tooth design, number of teeth, and diameter are all factors that determine their usage and suitability.

The blades on this list give you a broad spectrum to choose from, whether you need an all-purpose blade or one meant specially for crosscuts or maybe even a blade for use on laminates, while also ensuring that you get the best options in terms of quality.

Here is the list of our top picks again for you. Check out the specs, customer reviews, price and offers on Amazon – 

Last update on 2019-12-14 / Affiliate links / Images from Amazon Product Advertising API

Last Updated on

ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.

      error: