11 Best Sliding Compound Miter Saws Today

In Brief: Best Sliding Compound Miter Saws

  1. Dewalt DWS779
  2. Dewalt DWS780
  3. Dewalt DWS709
  4. Bosch Power Tools GCM12SD
  5. Delta 26-2250
  6. Hitachi C12RSH2
  7. Bosch CM10GD
  8. Makita LS1018
  9. Hitachi C8FSE
  10. Craftsman 10″ Single Bevel Sliding Compound Miter Saw
  11. Festool 561287 Kapex KS
How We Decided

23 products considered. 500+ reviews analyzed, 32 research hours spent, 15+ info. sources referred

More about our Methodology

A good compound miter saw should give you precision, wide-angle ranges and cutting capacities for both bevel and miter cuts, and smooth function as far as the blade and rails go.

Apart from these essential features, there’s a whole world of add-ons out there: lasers, sometimes even dual lasers, no-clearance designs, or specially-designed fences.

These 11 models deliver on all the essentials so that you get smooth, precise cuts while also incorporating the latest technologies and design features for your convenience.

Comparison Table: Top Sliding Compound Miter Saws

Check out a quick comparison table of sliding compound miter saws with key specs – 

ProductBlade (in)Miter Angle (Range)RPMPrice

Dewalt DWS779

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

12" 60 Degrees to Right, 50 Degrees to left 3800 Check Price

Dewalt DWS780

DEWALT 12-Inch Sliding Compound Miter Saw, Double Bevel (DWS780)

12" 60 Degrees to Right, 50 Degrees to left 3800 Check Price

Dewalt DWS709

DEWALT 12-Inch Sliding Compound Miter Saw (DWS709)

12" 60 Degrees to Right, 50 Degrees to left 3800 Check Price

Bosch Power Tools GCM12SD

Bosch Power Tools GCM12SD - 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

12" 60 Degrees to Right, 52 Degrees to left 3800 Check Price

Delta 26-2250

Delta 26-2250 12' Dual Bevel Sliding Cruzer Miter Saw

12" 60 Degrees to Right, 50 Degrees to left 4000 Check Price

Hitachi C12RSH2

Hitachi C12RSH2 15-Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Laser Marker

12" 57 Degrees to Right, 45 Degrees to left 4000 Check Price

Bosch CM10GD

Bosch CM10GD Compact Miter Saw - 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade

10" 60 Degrees to Right, 52 Degrees to left 4800 Check Price

Makita LS1018

Makita LS1018 10-Inch Dual Slide Compound Miter Saw

12" 45 Degrees to Right, 45 Degrees to left 4300 Check Price

Hitachi C8FSE

Hitachi C8FSE 9.2-Amp 8-1/2-Inch Sliding Compound Miter Saw

8.5" 57 Degrees to Right, 45 Degrees to left 5500 Check Price

Craftsman 10" Single Bevel Sliding Compound Miter Saw

Craftsman 10' Single Bevel Sliding Compound Miter Saw (21237)

10" 50 Degrees to Right, 50 Degrees to left 4800 Check Price

Festool 561287 Kapex KS

Festool 561287 Kapex KS 120 Sliding Compound Miter Saw

10.25" 60 Degrees to Right, 50 Degrees to left 3400 Check Price
 

Reviews of Best Sliding Compound Miter Saws

Dewalt DWS779

DEWALT Sliding Compound Miter Saw, 12-Inch (DWS779)

Dewalt has been at the forefront of miter saw manufacturing for decades and this 12-inch saw is a further testament to their high standards for quality.

The saw is powered by a powerful 15-Amp motor that is highly durable and gives you a blade speed of 3800RPM so that you can effortlessly cut through your workpiece.

The miter range is extremely broad: it miters 60 degrees to the right and 50 degrees to the left and has an adjustable stainless steel detent plate with 10 positive stops. This makes the most common angles much easier to access.

To move it about, it has horizontal steel rails, which have a clamping mechanism to secure it in place as well as ball-bearings that ensure that the saw is long-lasting.

It has a tall slide fence that allows for crown molding up to 7.5 inches and nested and base molding up to 6.75 inches vertically against the fence.

You can also use it to cut 2×14 dimensional lumber at 90 degrees and 2×10 lumber at 45 degrees.

PROS:
  • Wide miter range
  • Detent plate with 10 stops for common angles
  • Slide fence for crown, nested, and base molding
  • Gives your cuts a large depth and length
  • Dust bag collects dust fairly well
  • Cuts are smooth and precise
CONS:
  • Quite heavy

Check Reviews & Price on Amazon

Dewalt DWS780

DEWALT 12-Inch Sliding Compound Miter Saw, Double Bevel (DWS780)

This is one of Dewalt’s latest and most high-end and technologically cutting-edge miter saws. It shares a number of features with Dewalt’s other saws such as its 15-Amp motor that gives the 12-inch blade speed of 3800RPM.

However, what really sets it apart is the Integrated CUTLINE™ Blade Positioning System that uses a laser to predict the cut line so that you get much better accuracy and blade-to-workpiece alignment.

It has a fairly wide range for both miters and bevels.

For bevels, it has a double bevel design that allows you to bevel from 0 to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions.

It can miter from 60 degrees to the right to 50 degrees to the left. An adjustable stainless steel miter detent plate gives you 10 positive stops for faster access and improved productivity.

A cam lock miter handle with a detent override lets you quickly and accurately change miter angles.

The design also incorporates a tall sliding fence that supports crown molding up to 7.5 inches as well as nested and base molding up to 6.75 inches vertically against the fence.

To slide and move the arm, the saw has dual horizontal steel rails with a convenient clamping mechanism and linear ball bearings that make the movement smooth and ensure that the saw is durable.

PROS:
  • Double bevel saw with positive stops on both sides
  • Wide miter range with 10 positive stops
  • Sliding fence for crown, nested, and base molding
  • Laser alignment system
  • Cuts very smoothly
  • Motor is quiet and gives a soft start
CONS:
  • Dust collection system takes up a lot of space
  • Heavy

Check Reviews & Price on Amazon

Dewalt DWS709

DEWALT 12-Inch Sliding Compound Miter Saw (DWS709)

The DWS709 by Dewalt is a 12-inch sliding compound miter saw that is distinguished by its exclusive back fence design. This fence lets you cut up to 2×14 dimensional lumber at 90 degrees and 2×10 at 45 degrees.

In addition, the saw has a regular sliding fence that supports crown molding up to 5.5 inches and nested and base molding up to 4.5 inches vertically.

The saw is powered by a 15-Amp motor which gives you a blade speed of 3800RPM for smooth and easy cuts.

The miter range, like most Dewalt miter saws, is fairly large: it miters 60 degrees to the right and 50 degrees to the left.

The miter also has an adjustable detent plate made of stainless steel with 13 positive stops on it so that you can access the angles you want to quickly.

There’s also an over-sized bevel scale with easy-to-read angles which makes bevel angle adjustments quite easy. It has dual horizontal steel rails with linear ball bearings that ensure that it gives you many years of use.

PROS:
  • Back fence for cutting larger lumber
  • Sliding fence for crown, nested, and base molding
  • Large miter and bevel range
  • Laser gives you significantly improved accuracy
  • Cuts are precise and easy to make
CONS:
  • Dust bag isn’t very effective
  • Heavy

Check Reviews & Price on Amazon

Bosch Power Tools GCM12SD

Bosch Power Tools GCM12SD - 15 Amp 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade

The GCM12SD by Bosch has a 12-inch blade that is powered by a 15-Amp motor to give you a blade speed of 3800RPM.

It has an ergonomic ambidextrous trigger handle that makes it easy to use as well as a space-saving design that makes it easy to handle.

The design also features Bosch’s exclusive Axial-Glide system for smoother glide and cutting as well as pre-aligned fences that help the saw maintain precision.

It has a large cutting capacity with expanding base extensions that offer you 60% more left to right material support than most competing models in the market. It also has a 6.5-inch vertical capacity and a 6.5-inch crown capacity.

The miter capacity is 52 degrees to the left and 60 degrees to the right. It also has a double-bevel capacity that goes up to 47 degrees to both the left and the right.

Both the bevel and miter scales are stainless steel with large, easy-to-read markings.

Both the scales also feature detents: the miter scale has them at 0, 15, 31.6, 22.5, 45, 60 degrees and the bevel detents are at 0, 33.9, 45 degrees on both the left and the right.

The miter also has a push-button detent override for extremely fine-tuned angle adjustment.

Other convenient features include the dust bag, which is designed to catch up to 90% of sawdust and a clear blade guard for visibility through the cut.

Bosch’s product video for this model can be seen here:

PROS:
  • Large double bevel and miter range
  • Multiple detents for bevel and miter scales
  • Large cutting capacity due to base extensions
  • Fence for base and crown cuts
  • Very smooth glide
  • Makes effortless cuts
CONS:
  • Some people had alignment problems with the axis of the blade
  • Some users also had issues cutting squares because of other alignment issues

Check Reviews & Price on Amazon

Delta 26-2250

Delta 26-2250 12' Dual Bevel Sliding Cruzer Miter Saw

This saw by Delta uses 12-inch blades that are mounted on robot arms made of military-grade aluminum that give you unparalleled durability and accuracy.

The blade can reach a speed of 4000RPM and comes with a clear blade guard which gives you a clear view of the area while you are aligning the blade.

It has an adjustable crown fence lock that increases the stacked crown capacity to up to 7.5 inches at 45 degrees. You also get up to an 18-inch crosscut capacity.

The miter range is from 60 degrees to the right to 50 degrees to the left while the dual-bevel capacity goes up to 47 degrees on both sides.

The miter scale has 10 detents and positive stops while the bevel has 7 positive stops for the most common angles.

The controls for this saw are also quite easy to use. The miter controls can be used with one hand and are located at the front and include a push-button miter detent override as well as a front bevel release.

There is a flip-down slide lock so that you can make highly accurate plunge cuts of crown or other stacked pieces.

The handle is specially molded and has an ergonomic trigger so that the saw is comfortable to use for both right and left-hand users.

You can see Delta’s usage video for this model here:

 

PROS:
  • Slides very smoothly
  • Dual-bevel with a large bevel range
  • Broad miter range
  • Clear blade guard for unobstructed visibility
  • Accurate and smooth
CONS:
  • Dust collection system is ineffective
  • Carrying handle is too small

Check Reviews & Price on Amazon

Hitachi C12RSH2

Hitachi C12RSH2 15-Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Laser Marker

This 12-inch sliding compound miter saw by Hitachi works on a compact slide system while lets the head slide along fixed rails, eliminating the need for rear clearance.

The blade is powered by a 15-Amp motor to reach a no-load speed of 4000RPM.

It has a large sliding fence with a height of 5.125 inches to cut up to 7.5-inch crown moldings vertically.

The miter angle can range from 0 to 57 degrees to the right and 0 to 45 degrees on the left while the bevel angle can range from 0 to 45 degrees on both the left and right.

The scales have positive stops on prominent angles as well as prominent, easy-to-read indications so that you can quickly see the measurements.

The miter stops are present at 15, 22.5, 31.6, and 45 degrees on both the right and the left.

There’s also a laser marker system integrated into the design that significantly boosts your accuracy. There’s also a vertical handle that has a soft, vibration-reducing elastomer grip for better control and more comfort.

You can see the product video here:

 

PROS:
  • Positive stops on dual-bevel and miter scales
  • Laser is very accurate
  • Cuts very well
  • Long-lasting
CONS:
  • The handle can be a bit flimsy
  • A few people had issues with cutting square

Check Reviews & Price on Amazon

Bosch CM10GD

Bosch CM10GD Compact Miter Saw - 15 Amp Corded 10 in. Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade

The Bosch CM10GD is a 10-inch dual-bevel sliding miter saw that utilizes Bosch’s innovative Axial-Glide system that gives more precision than side saw rail systems.

It also gives you wider cross-cuts and enhanced alignment. The hinge arms also give you a more compact saw by reducing the front-to-back footprint significantly.

Because of these design features, which includes a tall 4.4-inch fence, it has wide cutting capabilities.

It can cut 12 inches horizontally, 5.5 inches vertically against the fence and up to 6 inches nested against the fence for crown cuts.

The 15-Amp motor gives you a no-load speed of 4800RPM which helps make these cuts very smooth.

The bevel and miter scales are marked by large, easy-to-read, and uniform indicators. The bevel capacity is 47 degrees on both the left and right with detents at 0, 33.9 and 45 degrees on both sides.

The miter range goes up to 52 degrees on the left and 60 on the right with detents at 0, 15, 31.6, 22.5, and 45 degrees on both sides and a 60-degree detent on the right.

Controls include a push-button miter detent override that makes fine miter angle adjustment much easier. There’s also a bevel lock lever and range selector located upfront for quick settings.

The product video is up here: https://www.youtube.com/watch?v=tpl924Rg9Qo

PROS:
  • Broad miter range
  • Broad dual-bevel range
  • Detents for both the bevel and miter scales
  • Axial-Glide system makes it smoother
  • Has a wide cutting ability
  • No clearance at the back to save space
CONS:
  • People have had issues with the right bevel
  • Trigger lock is unnecessarily stiff
  • Some users have complained about received models that have non-adjustable alignment issues that prevent straight cuts

Check Reviews & Price on Amazon

Makita LS1018

Makita LS1018 10-Inch Dual Slide Compound Miter Saw

This 10-inch saw by Makita features a compact design that helps to significantly reduce its weight when compared to other competing models on the market.

Despite its smaller size, it cuts up to 12 inches at 90 degrees and 8.5 inches at 45 degrees. The base of the saw is made of precision machined aluminum to keep your saw both light and efficient.

It can miter up to 47 degrees to the left and up to 60 degrees to the right with positive stops at 0, 15, 22.5, 31.6, and 45 degrees on both sides.

For bevel cuts, its range is 45 degrees on both sides with positive stops at 0 and 45 degrees on the left as well as the right. These stops, along with the electric brake, significantly boost your productivity.

The blade is powered by a 13-Amp motor that can give you a blade speed of 4300RPM. The rails for sliding are made using a linear ball bearing system engineered to deliver accurate cuts.

Other useful features include the easy-to-access rear handle bevel lock, the ergonomic rubberized handle for comfort and control, as well as the soft start for smoother starts that don’t displace your workpiece.

There’s even a see-through blade guard for an unobstructed view while making alignments.

PROS:
  • Large dual-bevel and miter range
  • Multiple miter detents
  • Weighs less than most other competing saws
  • Soft start
  • See-through blade guard
  • Cuts with ease
CONS:
  • Bevel gauge isn’t clearly marked
  • Very few bevel detents
  • Handle button is cheaply made
  • Some users had issues with the smoothness of the ball bearings

Check Reviews & Price on Amazon

Hitachi C8FSE

Hitachi C8FSE 9.2-Amp 8-1/2-Inch Sliding Compound Miter Saw

This saw by Hitachi is much more compact than most of the other saws on this list because of its unorthodox blade size.

The blade is 8.5 inches, rather than the standard 10 or 12, and is powered by a 9.5-Amp motor that gives fairly high speed of 5500RPM.

It also weighs only 31lbs so it’s easier to transport with you, with a sturdy enough construction to handle job site travel.

The miter angle range is also fairly standard despite the smaller size: it goes up to 57 degrees on the right and 45 degrees on the left.

The bevel angle range is 48 degrees on the left but only 5 degrees on the right. Positive miter stops are present on the miter scale for 15, 22.5, 31.6, and 45 degrees to the left and right.

The measurements are easy-to-read and the linear ball bearing slide system gives you significantly improved accuracy.

The saw also has an adjustable pivot fence broadly to support workpieces for better stability while cutting crown molding.

Other useful features include a splinter guard for safety, a vertical handle with a vibration-reducing elastomer grip, and electronic speed control for consistent speed.

The product video is available here:

 

PROS:
  • Broad miter angle range
  • Positive miter stops
  • Lightweight and easy to transport
  • Adjustable fence
  • Splinter guard for safety
CONS:
  • Some of the parts are made with low-quality materials
  • Some users have had issues with fence alignment
  • Some people noticed that their cuts were off by 1/8th to 1/6th of an inch

Check Reviews & Price on Amazon

Craftsman 10″ Single Bevel Sliding Compound Miter Saw

Craftsman 10' Single Bevel Sliding Compound Miter Saw (21237)

This 10-inch sliding compound miter saw is meant to give you precision, portability, and seamless slicing all rolled into one model. It has a 15-Amp motor to power its blade, giving it a speed of 4800RPM.

The blade, despite being 10 inches, gives you a cutting capacity of up to 12 inches.

It has a miter range of 0 to 50 degrees on both the left and the right. The scale includes positive stops for all the common angles for quick access and accurate cuts.

It only has a single bevel functionality and can go up to 50 degrees to the left. The design integrates a laser that gives you an accurate cut line for better alignment and more accuracy while cutting.

The body of the model is made of aluminum to keep it lightweight but durable at the same time and it weighs 39.38lbs.

It also has telescoping aluminum extensions that provide additional support while you’re working on longer workpieces.

PROS:
  • Less expensive than most other competing models
  • Lightweight
  • Positive stops for common miter angles
  • Laser for more accuracy
CONS:
  • Some of the plastic parts are of low quality
  • Might need frequent adjustments to keep perfect alignment

Check Reviews & Price on Amazon

Festool 561287 Kapex KS

Festool 561287 Kapex KS 120 Sliding Compound Miter Saw

The Kapex by Festool is designed to be compact while giving you best-in-class precision. It achieves this precision through its dual lasers that let you align cuts from both the left and right sides.

They let you accurately define the cut line on the material.

The controls for the lasers are also very convenient: they have 3-axis adjustment controls for fine-tuning as well as a convenient button to turn the lasers on without turning the saw on.

The rails feature Festool’s Rail Forward Design that prevents head play for better accuracy. They also make it more compact so that you can put it against a wall while using it.

This compactness also gives it an ergonomic structure when it is in the holding position so that you can carry it to your job sites.

The blade diameter is 10.25 inches with a maximum bevel range of 47 degrees on both sides and a miter range of 50 degrees to the left and 60 to the right.

The bevel can be controlled to within a fraction of an angle using the fine-tune control knob. The motor is a 13-Amp one that gives you a variable speed so that you can match the blade speed with the material that you need to cut.

When in use, the blade is locked into a special cutting position that maximizes the saw’s capacity by utilizing the back portion of the blade.

You can cut crown molding up to 6.625 inches in the nested position and vertically up to 4.75 inches x 0.75 inches. The saw also gives you a unique trenching capability.

PROS:
  • Incredibly precise
  • Dual laser system with 3-axis controls
  • Wide bevel and miter range
  • Bevel has a fine-tune control knob
  • Variable speed to match the material
  • Rail Forward Design eliminates the need to worry about clearance at the back
CONS:
  • Very expensive
  • Blows dust around
  • Motor failure complaints are not uncommon

Check Reviews & Price on Amazon

No matter if you are a professional or just a hobbyist a sliding compound miter saw is a great addition to your workshop.

If you are going to be doing any kind of crosscutting you need to invest in the best sliding compound miter saw so you can make the most precise cuts on a variety of angles.

As with other miter saws the sliding compound miter saw features an arm that can be raised and lowered for a variety of cuts. The saws also have a pivoting feature to cut on various angles.

The sliding compound miter saw is similar to a compound miter saw, but is a little different. The sliding compound miter saw slides both forwards and backwards, hence where the name comes from.

This sliding movement allows the user to make wider cuts. The saw also covers a wider range in cuts than the non-sliding variety.

When it comes to versatility in miter saws, the sliding compound miter saw is the most versatile of the group.

How to Purchase the Best Sliding Compound Miter Saw

How to Purchase the Best Sliding Compound Miter Saw

When purchasing the best sliding compound miter saw consider these important features: power source, blade, cutting capacity, angle ranges, positive stops, cutting guide, material supports, dust collection, safety, and extra features.

The sliding compound miter saw and the sliding dual compound miter saw are the two most popular choices of miter saws because the increase the blades cutting capacity.

For example, a non-sliding saw with a 12 inch blade can only cut 12 inches when doing a 90 degree crosscut, for a 10 inch blade it would be a 10 inch maximum.

The sliding feature increases the crosscut capacity by several inches, how much depends on the blade’s size.

Power Source

Majority of your sliding compound miter saws are going to be corded with a 10, 12, or 15 amp motor. The larger the motor amperage is the more powerful the saw will be.

How powerful you ned the motor will depend on the types and thickness of materials you will be working with.

Corded saws are no longer the only option though, you can now choose from battery-powered so you are no longer limited to the reach of the cord.

Cordless saws are designed for medium duty work and when properly maintained last a long time thanks to the brushless motors. A soft start motor offers a quieter startup and smoother operation.

Blades and Crosscutting

You need to consider the blade size of the sliding compound miter saw. Common sizes are 8 ¼, 8 ½, 10, and 12 inch blades, but you can also find cordless sliding compound miter saws in 7 ¼ inch blades.

The bigger the blade is the bigger your cuts will be, including your crosscut.

To ensure you get a big enough sliding compound miter saw you need to combine the blade size and the sliding capability to see what the largest width you can cut is. It’s best to error on the larger width of things.

Tooth count for blades is also important as that affects your finish. The more teeth per inch the smoother and cleaner the finished cut will be.

Always replace your blade as it becomes dull for safety and to extend the life of the saw.

Angle Ranges

All sliding compound miter saws can cut at 45 degree angles, but some will offer other angle ranges. If you have special angle requirements for your projects you will want to look to see if your miter saw will cut at those odd angles.

For most people though, even skilled carpenters, most sliding compound miter saws you can buy have the angles you need.

Positive Stop Detents

Positive stop detents are a standard feature on most sliding compound miter saws, but it doesn’t hurt to double check if the one you are considering offers them.

The detent is a catch that locks the saws movement until you release it. This feature ensures the accuracy of your cuts. Most have these positive stop detents at common angles, including 22.5 degrees, 45 degrees, and 90 degrees.

You want to find a saw that offers an easy to use override so you can move the saw without having to stop at each detent.

You can also look for bevel detents, which 0 and 45 degree ones are good to have.

Cutting Guide

One type of cutting guide is a laser attachment. They are not available on every sliding compound miter saw, but they are nice and work pretty well.

The downfall to the laser is it can throw your cut off a little as the laser isn’t attached to the blade.

IN brighter lighting, the red laser is often difficult to see. You can solve this with a green laser, but those get a little pricey.

Some saws today use an LED to place the blade’s shadow directly onto the material. The shadow ensures for an accurate cut every time.

Material Supports

Material supports are designed to keep the materials in place while cutting and are often referred to as fences. They come in different heights and some have the ability to extend out.

How tall you want the fences depends on what you plan to cut, but fences taller than the material offer the best and most stable support.

Dust Collection

To keep a clean workspace and to save your health, you want to opt for a sliding compound miter saw that offers some form of dust collection.

You may be able to find one that allows for a vacuum attachment, but those are rare. Instead look for a saw that offers a dust collection bag you can empty.

Safety

Look for sliding compound miter saws that offer important safety features. The sliding compound miter saw should have a blade brake to immediately stop the blade within a couple of seconds of you letting go of the trigger.

A blade guard is another feature to look for as it protects you from the exposed part of the blade when you are cutting.

Extra Features

These are considered extra features, having them is nice but they are not always a necessity. One feature to look out for is a arm lock to hold the blade arm in place.

Pair that with a handle and you can easily and safely move your sliding compact miter saw around. Material clamps are a nice touch as it aids in holding the materials securely in place.

Benefits of a Sliding Compound Miter Saw

Benefits of a Sliding Compound Miter Saw

The benefit to a sliding compound miter saw is that it can do everything a compound miter saw can, plus it can slide forward and backward.

Just like a compound miter saw, a sliding compound miter saw makes miter and bevel cuts. The difference between the two saws is in the width of the material that they can cut.

The sliding compound miter saw features rails that provide the saw with the ability to slide forwards and backwards. The extra width allows the sliding saw to cut across material wider than its blade.

As a compound saw the sliding miter saw doesn’t take up a lot of space. A sliding compound miter saw is still a compound saw, but it does take up more space than a traditional compound miter saw.

The reason it takes up more space is due to their design as they need more room to work.

The benefit to a sliding compound miter saw is they are made to cut across the wider materials without requiring anything to be repositioned. It is the ideal choice for projects that require cutting bevels and miters into wide boards.

What is the Difference Between A Sliding Compound Miter Saw and a Compound Miter Saw?

The difference between the two saws is the sliding compound miter saw features rails that allow the blade to move forward and backwards.

A stationary compound miter saw and a sliding compound miter saw share many similarities. Both of these saws can make miter and bevel cuts quickly and efficiently.

The sliding compound miter saw offers the same versatility as the stationary compound miter saw, despite its larger footprint.

The difference between the two saws is that the sliding compound miter saw offers rails that allow the blade of the saw to slide either forward or backward.

This sliding movement allows for longer cuts on wider pieces of wood without having to stop and reposition your material.

FAQs

Here are some answers to the most commonly asked questions about sliding compound miter saws.

Is a sliding compound miter saw better than a traditional compound miter saw?

For some projects a sliding compound miter saw is better than a miter saw and a compound miter saw. The sliding compound miter saw makes wider cuts than both of the other saws because the rails allow the blade to slide forwards and backwards.

What is a sliding compound miter saw?

A sliding compound miter saw is a compound miter saw with rails. The rails allow the saw blade to slide forwards or backwards to make wider cuts so the saw can accommodate wider boards without affecting performance.

Why do I need a sliding compound miter saw?

If you are working on projects that use wider boards than what a traditional compound miter saw can handle, so upwards of 12 inches wide, you will need to invest in a sliding compound miter saw. This saw makes it to where you won’t have to stop and make two cuts to cut the wider pieces.

What is the advantage to buying a sliding compound miter saw?

The biggest advantage to buying a sliding compound miter saw is that it provides you with the same versatility as the compound miter saw, but also offers a sliding feature. The sliding feature makes the saw very similar to the radial arm saw, as you can move the blade backwards and forwards to make longer cuts.

Final Words

These saws have been chosen not just for their features and abilities, which are undoubtedly excellent and cutting-edge, but also for their popularity and high rates of customer satisfaction.

Knowing that multiple other people have tried these products out before you and have had favorable experiences with it should put to rest any apprehensions you might have so that you can choose the best model for your needs without hesitation.

Here is the list of our top picks again for you. Check out the specs, customer reviews, price and offers on Amazon –

 

Last update on 2019-12-14 / Affiliate links / Images from Amazon Product Advertising API

Last Updated on

ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.

We will be happy to hear your thoughts

      Leave a reply

      This site uses Akismet to reduce spam. Learn how your comment data is processed.

      error: