Cordless vs. Corded Reciprocating Saw – Which One You Should Buy?

Photo of author
ReviewsWorthy Team is reader-supported. As an Amazon affiliate, we earn from qualifying purchases.

In Brief: Cordless vs. Corded Reciprocating Saw

A cordless and a corded reciprocating saw mainly differ in their power sources, the first one uses lithium-ion batteries while the second one uses the traditional electrical input. As a result, a corded reciprocating saw is less powerful, but easier to carry around and safer, making it suitable for DIYers and small businesses. A corded circular saw is powerful, can cut through any material and works for hours at end, making it most suited for professionals in the demolition industry or construction business.

While there are so many types of saws out there, one particular question that always remains is to buy the corded or cordless version.

If you go out searching for tools often, this question might have confused you on more than one account.

Today, through this article, we tackle the question of the corded vs the cordless reciprocating saw and hope to clear the air and resolve your doubts.

Whenever you decide between a corded or cordless tool, you are essentially deciding whether to go for power or convenience.

A reciprocating saw is a powerful tool that delivers the cut by going forward and backward, in a reciprocating manner.

It is used mainly for breaking down materials, in the demolition industry or to make rough, coarse cuts.

Corded Reciprocating Saw

Makita JR3050T 11 Amp Reciprocating Saw

A cordless reciprocating saw mimics the action of a typical saw, by making to and fro cuts, and uses electricity as its main power supply.

As the supply of electricity is unlimited and continuous, it is a sheer beast of a power tool and can cut through any possible material.

A corded reciprocating saw can be found in the toolboxes of professionals in the demolition industry or in workshops to break through stuff.

It can rip almost any material apart- be it wood, metal or steel. It can work for hours at an end since it works at electricity and won’t tire itself at any point

A corded reciprocating saw is limited in its mobility since it is connected via a cord to an electrical port.

It can get heavy and a bit dangerous to carry around the saw on job sites. It also gets useless at a place with no electricity.

Cordless Reciprocating Saw

DEWALT DCS380B 20-Volt MAX Li-Ion Reciprocating Saw (Tool Only)

The cordless reciprocating saw is a weapon of mass destruction for the beginners, the novices, people starting out. It delivers the cut by a mechanism of the blade going up and down.

It is a coarse woodworking tool that runs on lithium-ion batteries and requires regular charging

The absence of the cord gives a new meaning to freedom which can be felt while using a cordless reciprocating saw.

It is ideal if you require a portable saw and it can each the deepest corner and coziest confine of a house, making it suitable for home redecoration projects.

A cordless reciprocating saw, as it is run by batteries, can run only for a certain time before it loses its power.

Also, the power delivered by the battery can, in no way, compare to power derived from electricity and thus restricts the materials a cordless reciprocating saw can cut through, making it fit for light weighted jobs only.

Corded vs. the Cordless Reciprocating Saw

Here are some key parameters which differentiate corded with cordless reciprocating saws.


A corded reciprocating saw is a heavy power making it suitable to cut through any material- wood, lumber, steel or metal.

It is thus used by a variety of professionals- the plumbers, carpenters, masons and also freelancers involved in demolition work.

It is widely used in the construction industry as it is a coarse tool which can rip anything apart.

A cordless reciprocating saw is low power but still every inch as useful and dynamic as a reciprocating saw with an ability to cut across a wide range of materials.

It is portable and can be carried around easily, and even works at job sites with no electrical outlets.


A corded saw has extraordinary cutting power and can tackle a variety of materials, and is thus suitable for a large range of jobs.

A cordless reciprocating saw is light, portable, safer and easier to operate. It is a worthy investment for DIYers who usually work with softwood boards and lighter materials.


A corded reciprocating saw is slightly difficult to lunge around due to its heavy weight. It runs on electricity and hence fails in places with no electrical outlets.

It can be unsafe for beginners as it has the capability to rip off a finger with the kind of power it delivers.

A cordless reciprocating saw will simply not have the same range of materials as the regular reciprocating saw.

Also, it is possible that its batteries might get drained and need replacement, adding to the operating and maintenance costs.


Both corded and cordless reciprocating saws fall in the same price range, hence it is best to decide the type of saw you require solely on the features and their usability.

Final Words

While deciding to go for either a cordless reciprocating saw or a corded one, you really need to consider what kind of jobs are you going to be working, with what kind of materials and what is the range of versatility you require.

If your job requires you to cut through hard materials on a daily basis or you seem to be working long hours at an end, the corded reciprocating saw will never fail you.

It is a sturdy powerhouse of a saw and does its job at an unparalleled efficiency. It can work with most kinds of materials and you would not find a more steady companion for demolition purposes.

If you mostly deal with light weighted jobs and your workshop sees a regular supply of softwood instead of a range of materials, your best bet would be a cordless reciprocating saw.

Apart from the low power, it wins over in almost every other aspect. It provides superior handling convenience, is easy to operate and can be carried around quite easily.

About ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.