Quick Answer: Dremel 4000 Vs Dremel 4200
Both the Dremel 4000 and the Dremel 4200 are high quality, high functioning rotary tools. The Dremel 4000 is the most basic rotary tool which is ideal for basic purposes, comes at a cheap price but gets hot when used too much, thus making it ideal for DIY enthusiasts and small craftsmen. The Dremel 4200 resolves the heating problem, has a powerful motor and is popular among professionals.
The Dremel 4000 and the Dremel 4200 are superior quality rotary tools that are an amazing fit in the crafts world, for challenging and fine detail rotary work and make grinding and sanding projects quite easy to do.
Both the tools are high quality and have a large array of accessories available which diversify the type of jobs they are capable of doing. Read on to find out which model is best suited for you
Comparison: Dremel 4000 and 4200
The Dremel 4000 and 4200 are of the same make and differ only in certain features like the motor, the accessory change mechanisms, the number of available Dremel accessories and the presence or absence of the venting mechanism for cooling the tool.
The specifications are explored in detail in the following table:
| Parameters | Dremel 4000 | Dremel 4200 |
|---|---|---|
| Weight | 4.85 lbs | 1.18 lbs |
| Speed | 5,000 to 35,000 RPM | 5,000 to 35,000 RPM |
| Motor | 1.6 amps | 1.6 amps |
| Collet capacity | 0.8 mm, 1.6 mm, 2.4 mm, 3.2 mm | 1/32", 1/16", 3/32", 1/8" |
| Cord length | 6 ft | 7 ft |
| Power source | Corded, Electricity | Corded, Electricity |
| Voltage | 120 V | 120 V |
| Accessory change system | EZ Twist | EZ change |
| Length of tool | 6 inches | 9 inches |
| Electronic feedback control | Yes | Yes |
| Price |
The Dremel 4000
Dremel is an American brand known for making power tools. It has made a name for itself in the tools market, mainly owing to its high quality and innovative designed rotary tools.
Dremel’s tools are backed by strong, unique and inventive Dremel concepts that support the high speed and less torque found in Dremel’s rotary tools and this sets them apart from the rest.
The Dremel 4000 is a variable speed rotary tool and it has a very large set of accessories available for it. It is a basic model in Dremel’s 4×00 line but is reasonably priced and built to last.
It is run by a 1.6 amps motor which can touch speeds from 5000 to 35,000 RPM. It has electronic feedback and EZ twist technology for quick accessory changes.
USPs
- EZ twist system allows for fast and smooth accessory changes
- Electronic feedback allows for any speed to optimize cutting
- 360-degree grip zone makes for ergonomic design and is user-friendly
- Large range of Dremel accessories that are compatible with the tool and readily available
- Easy to store and carry around as comes with hard carrying case and an accessory case
- 6 included accessories containing cutter guide, sanding guide, garden tool sharpener among others
Limitations
- Gets hot quickly, which is a problem with most rotary tools, thus you will need to invest in gloves
- Weighs a lot compared to rotary tools
- Noisy as it is an older model
Suitable for
The Dremel 4000 is s superb rotary tool ideal for sanding, carving, cutting, cleaning and grinding. It has all the basic functionalities of a rotary tool and comes with a large range of accessories to extend its capabilities.
It is not too expensive, thus it would find good use with a small craftsman, a beginner or a DIY enthusiast who will receive a load of jobs at a little investment.
It is not ideal for regular use as it has a tendency to get hot when overworked.
The Dremel 4200
This tool is also made by Dremel. Dremel is so famous for making rotary tools that often, in common jargon, the rotary tool itself is called a Dremel.
Thus, it is important to note here that Dremel is a brand, and not the tool itself. Dremel rotary tools are unparalleled in the market and are quite longstanding.
The Dremel 4200 is a variable speed rotary tool that also has quite a lot of Dremel’s accessories available for it, though less than the 4000 model.
It is run by a 1.6 amps motor and can achieve a speed anywhere from 5000 to 35,000 RPM. It is one of the first Dremel tools to have the EZ change mechanism for accessory changing which enables a quick change without a wrench.
USPs
- Venting design keeps the tool cool and does not allow it to get hot as the 4000 does
- Electronic feedback allows for any speed to optimize cutting
- EZ change system allows you to swap accessories without a wrench or any other tool
- 360-degree grip zone makes for ergonomic design and is user-friendly
- Easy to store and carry around as comes with hard carrying case and an accessory case
- Replaceable brushes extend the lifetime and usability period of your tool
Limitations
- Compatible with less Dremel accessories than the 4000
- EZ change system limits the number of Dremel’s accessories that can be used
- Expensive compared to the 4000
Suitable for
The Dremel 4200 is a powerful rotary tool that can do all the operations such as cutting, carving, grinding, cleaning sanding with ease. In addition, it has an easy accessory changing system that gives speed to the users.
It solves the problem of heating when overworked and thus can be used for regular work.
It is thus best suited for professionals who work long hours and want an efficient, quick and smooth tool that can work noiselessly without getting heated.
Summary
Both the Dremel 4000 and the Dremel 4200 are good rotary tools backed by the longstanding reputation and finesse of the Dremel brand and make.
You will not go wrong with either purchase though it makes sense to make a decision by evaluating the nature of your job and your personal requirement
The Dremel 4000 is a great basic rotary tool. It comes with an easy accessory change system conceptualized by Dremel, the EZ twist system.
It is corded, variable speed and runs on a 1.6 amps motor. The only problem is the heating and noise when overworked.
Thus, it is best suited for light work and will be a good buy for beginners, DIY enthusiasts, small craftsmen due to its reasonable price.
The Dremel 4200 has the potential to be a great professional rotary tool as it is lighter than the Dremel 4000, it solves the problem of heating and noise and it comes with an upgrade on the accessory change system which allows you to swap two accessories without a wrench.
Therefore, it is best suited for long hours of usage at the hands of a professional craftsman.
Last update on 2024-10-14 / Affiliate links / Images from Amazon Product Advertising API