Quick Answer: DRILL DOCTOR 500X vs 750X
The Drill Doctor 500X and 750X are both extremely useful products for drill bit sharpening. The 500X with its two standard angle settings and a lower range of available bit sizes are the perfect fit for you if you plan to drill regularly at home for small projects. For the professional worker, the 750X offers more freedom in bit sharpening, building upon the features of the 500X.
Drilling being one of the most essential parts of any construction activity, it is natural that your drilling bits would get blunt or broken from time to time.
Dull bits result in a decrease in the quality of the work and an increase in the time needed to finish the job. It can even damage your drill.
A drill bit sharpener, thus, becomes an important tool for both the home-hobbyist and the professional worker when working with the drill.
Drill Doctor’s easy-to-use Drill Bit Sharpeners 500X and 750X make the task of restoring a sharp, cutting edge on bits, and even putting an edge back on broken bits, quicker than was ever possible with sharpening flat blades.
They are both useful tools with only a few differences between them.
Comparison Table: Drill Doctor 500X vs 750X
Check out the comparison of the key aspects of these two products.
| Parameters | 500X | 750X |
|---|---|---|
| Drill Bit Material Types | Carbide, Cobalt, High-Speed Steel, Black Oxide, TiN-Coated, & Masonry | Carbide, Cobalt, High-Speed Steel, Black Oxide, TiN-Coated, & Masonry |
| Drill Bit Sizes | 3/32” to 1/2” Twist & Masonry Bits (Optional 3/4” chuck available) | 3/32” to 3/4” Twist & Masonry Bits |
| Twist Bit Point Angles | 118° and 135° | 115° to 140° |
| Creates & Sharpens Split Points | Yes | Yes |
| Adjustable Chisel & Relief Angle | Yes | Yes |
| Adjustable Material Take Off (MTO) | No | Yes |
| Portability | Easy (Lightweight) | Easy (Lightweight) |
| Warranty Duration | 3 years | 3 years |
| Who Should Use | Designed for both DIY & professional user | Built for professional use |
| Price |
Quick Review of Drill Doctor 500X
Drill Doctor is a leading manufacturer of drill bit sharpening tools in the USA. It is a part of the larger American company, Darex, known for making different types of industrial sharpeners since 1973.
The Drill Doctor 500X can sharpen a wide range of bits from 3/32″ to 1/ 2″.
It offers two sharpening angles for your drill bit at 118° and 135° and can work on a variety of materials including carbide, cobalt, high-speed steel, black oxide, TiN-coated, twist, and masonry bits.
It can also create and sharpen split point bits from standard points.
The 500X sharpens bits in 3 easy steps: align, sharpen and split. A secure, variable alignment system allows the chisel and relief angles to be easily adjusted.
It ensures that bits are held in place with the help of longer chuck jaws so that accuracy is not compromised.
This How-To video shows you the working of the Drill Doctor 500X in detail:
The sharpening wheel, made of diamond, boasts ease combined with industrial strength and is designed to stay cool during use, preventing bits from becoming too hot while sharpening.
It has long-term durability of 200 sharpenings and is quick and easy to change, requiring no additional tools during replacement.
Special Features
- “Push to Stop” drill point splitting port prevents over-splitting the bit point
- Permanent magnet motor produces consistent power, regardless of speed or load
- Cast aluminum point angle shuttle for added durability
- Easy to replace diamond sharpening wheel
Limitations
- Unable to sharpen bits past ½” (buy additional ¾” chuck)
- Only sharpens bits to 118° or 135° point angles
- Plastic case could be of better quality
- Takes some time to adjust to
The Drill Doctor 500X is ideal for the serious DIY-enthusiast and the home-hobbyist who need to sharpen bits regularly.
It can be used professionally as well but the fact that it’s not as powerful as some other drill bit sharpeners out there should be kept in mind.
The 500X can sharpen most standard bits and is a good fit for workshops that use separate bits for drilling wood and metal.
Quick Review of Drill Doctor 750X
The Drill Doctor 750X has a professional, easy-to-use system making drilling work faster by sharpening dull bits at any angle from 115° to 140°.
Like the 500X, it can sharpen carbide, cobalt, high-speed steel, black oxide, TiN-coated, twist, masonry and split bits.
One step ahead of the 500X, though, it is capable of sharpening bits starting at 3/32″ and all the way up to 3/4″.
The 3-step sharpening process and alignment system consisting of longer chuck jaws of the 750X are also similar to those in the 500X.
The diamond sharpening wheel also has the same features and design.
Watch this demo video to understand the working of the Drill Doctor 750X:
The 750X drill bit sharpener allows the user to change the amount of material removed during sharpening.
This makes it possible to sharpen the bits in a more customized and personal manner so it can fit the demands of the individual user while, at the same time, extending the life of the bits along with keeping them sharp and efficient.
Special Features
- Custom point angle sharpening makes it possible to shape bits according to your needs
- Adjustable material take-off allows you to control the amount of material removed during sharpening which extends the life of bits
- “Push to Stop” drill point splitting port
- Permanent magnet motor produces consistent power
- Cast aluminum point angle shuttle for added durability
- Easy to replace diamond sharpening wheel
Limitations
- The plastic case could be of better quality
- Takes some time to adjust to
The Drill Doctor 750X was designed for the serious tool user. It is best for professional use and is usually preferred by woodworkers, carpenters, and general contractors as it can sharpen a wider range of bits more efficiently and at a greater variety of angles.
Key Differences
Drill Doctor’s 750X is one step ahead of the 500X in drill bit sharpening, allowing the user a degree of customization during bit sharpening.
Several of the other features, however, remain the same in both products. Here’s a quick overview of their features for better comparison.
Summary
The Drill Doctor 750X is an improvement over the 500X if the bit size options and the free reign over angle settings are concerned. Its adjustable material take-off is also an added bonus.
While both tools offer ease and accuracy, the 750X with all its additional features comes up as the more attractive candidate.
However, the 500X, a product definitely worth its money, may yet prove to be a better option for you, depending upon your needs.
Last update on 2024-10-14 / Affiliate links / Images from Amazon Product Advertising API