Grizzly G0690 vs. G1023 : Which One is Right for You?

Photo of author
ReviewsWorthy Team is reader-supported. As an Amazon affiliate, we earn from qualifying purchases.

Quick Answer: Grizzly G0690 vs. G1023

Both the G0690 and G1023 are superior table saws manufactured by Grizzly. They are sturdy and long-standing and don’t break down easily. The G0690 is a traditional table saw with the additional riving knife which makes it safe for beginners. The G1023 is an enhanced table saw with a serpentine single belt, superior fence and higher motor power which makes it more suited for professionals.

Grizzly Industrial Inc., more commonly and fondly known as Grizzly in the woodworking circles was founded in 1983 and is based in Bellingham, Washington.

It is one of the leading companies manufacturing woodworking and metalworking machinery that sells its products through retail shops, mail order, and internet channels.

It is a shoppers paradise for carpenters and DIYers looking to stock up their toolset and manufactures table saws, jointers, bandsaws, planers, drill presses, lathes, dust collectors, shapers, wide belt sanders, edge sanders, combo sanders, and drum sanders.

The tools are of the exclusive Grizzly make and provide unmatched reliability, strength, and endurance.

If you are looking to build up your workspace and buying a table saw, you cannot do better than Grizzly.

Grizzly G1023 or G0690 are the frontrunners for a table saw and any further confusion between the two is completely justified, for these are the best table saws out in the market today

Grizzly G0690

Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch

Let’s find more about this –


The Grizzly G0690 is 10″ 3HP 220V cabinet table saw with a riving knife. It weighs 507 pounds, thus it is best for you to decide a place and dedicate it to this saw.

It runs on your regular electricity, 220V, 60V single supply and is suitable for the American households.

It has a Magnetic Switch with Overload Protection & Disabling Pin that protects your saw from electric failures. It runs on a 3 HP motor at a speed of 3450 RPM and power is transferred using the triple belt V drive.


The G0690 is a sturdy table saw that does not break down easily. It has good dust collection and superior roving knife and fence.

Grizzly G0690 Cabinet Table Saw with Riving Knife, 10-Inch

It has a 30” stock rip capacity and the traditional swing arm arbor design .

It has a good fence and superior mechanism to saw out the riving knife. The riving knife makes the G0690 safe and less prone to kickback.

Here is a video that reviews the G0690 and will offer you more clarity:




The G0690 has a lightweight throat plate and can work its way out of the adjusted position quite easily and quickly.

The traditional triple belt drive system is adequate but the single serpentine belt drive system of the G1023 is superior and smooth.

The G0690 is made in Taiwan and some users complain about quality control, inspection, and packaging. The G0690 also tends to have its teeth clogged with sawdust while elevating and lowering the blade.


The G0690 is a dedicated cross-cut saw. Thus, if your work involves a lot of jobs that require a cross cut, go with the G0690 saw. As it runs on 3HP, thus it will be suited for wood but not other materials.

It is a great saw for beginners as it is safer due to the riving knife.


Grizzly G1023

Grizzly G1023RLW Cabinet Left-Tilting Table Saw, 10-Inch

Now, let’s check out key aspects of G1023


The Grizzly G1023 is a 10″ 5 HP 240V cabinet left tilting table saw. It weighs 509 pounds, thus just like the G0690, it is best to find a place for your new G1023 and let it remain there. It runs on 240V electricity, 60 V single supply.

It has an ON/OFF Push Button Switch with Large Shut-Off Paddle & Padlock and you might need to purchase a voltage regulator to protect it from electrical failures.

Grizzly G1023RLW Cabinet Left-Tilting Table Saw, 10-Inch

Its motor runs on 5 HP which means it has more power than the G0690 and can cut the harder materials too.


The G1023 series uses a single serpentine belt, while the G690 series uses three matched-length belts. Thus, this adds to lower replacement costs as the G1023 uses a single belt.

The G1023 adequately collects the sawdust and is a sturdy saw that is meant to go on for a long time.

Grizzly G1023RLW Cabinet Left-Tilting Table Saw, 10-Inch

The G1023 has the shop fox classic fence which is wider and more proven. It also has a dust shroud that encloses the blade and improves DC performance.

What this a video that reviews the G1023 table saw and make up your mind!




The G1023 is made in China while the G0690 is made in Taiwan. While they both live up to Grizzly’s unusually high expectations, manufacturing in Taiwan is known to be better.

A single serpentine belt is smoother but can slip under load. Also, the blade guard is harder to remove and is not steady, thus increasing the danger during a kickback.

The magnetic starter is inside and the on-off switch is located under the rails, in an inconvenient position. All these are trivial issues and 1023 is known to perform any job with high precision.


The G1023 is a dedicated rip saw. Thus, if your work involves a lot of jobs that require a cross cut, go with the G1023 saw.

It is about 20% cheaper than a G0690 and has superior features in terms of its single serpentine belt and fence mechanism. It runs on a 5HP motor which makes it suitable to cut hard materials also.

Final Words

Both the G0690 and G1023 are superior table saws and you would not go wrong with either of them. Go for the G0690 if you are looking for a traditional table saw that is safer to operate. Check price on Amazon here>

Go for the G1023 if the newer technology of the serpentine single belt and the new fence appeals you. Check price on Amazon here>

Whatever you end up purchasing will be a great investment as Grizzly manufactures products you can be proud of.

About ReviewsWorthy Team

Our team consists of enthusiastic and passionate people from different fields and experience. Some are geeks and spend most of their time among gadgets while others love nature and are always on the move! We spend 10s of hours researching and writing on each topic. The articles are then quality checked by our editors. View our "About us" section for more details about process and team.