If you have tinted windows in your car, then you should know the proper way to care for them.
With proper cleaning, you can keep your tinted windows looking as great as the day they were installed.
Unfortunately, if not performed correctly, a window cleaning can damage your window tints.
This guide will outline step-by-step methods for safely and effectively cleaning your tinted car windows.
- Quick Answer: How To Clean Tinted Car Windows
- How to Clean Tinted Car Windows
- Soapy Water For Full Cleaning of Window Tints
- Water For Routine Cleaning
- Glass Cleaner For Gleaming Windows
How to Clean Tinted Car Windows
All three of these techniques have some common threads. No matter which technique you use, you should:
- Leave your windows alone if you have just had them installed. The curing time for window tints depends on temperature and could be up to 30 days. Do not clean them during this time.
- Park your car in a shady spot. You want to avoid allowing cleaning solutions to dry onto the window, so try to avoid direct sun exposure.
- Use microfiber cloths rather than abrasive sponges, razor blades, or iron wool.
- Avoid ammonia-based cleaning products at all costs.
Each of the techniques outlined below has its place. For routine, weekly cleaning you should use the first method.
For cleaning windows that have gotten noticeably dirty, use the second method. For windows that have gotten excessively dirty, use the third method.
Soapy Water For Full Cleaning of Window Tints
Time needed: 1 hour.
If your windows are too dirty, the above methods will take too long. Apply this method, then use one of the above methods afterward to finish the job.
- Step 1: Mix A Soap Solution
Grab a bucket, fill it with warm water, and add around one teaspoon of dish soap per gallon of water. Mix it thoroughly.
Take a soft sponge and leave it in the bucket for a minute so that it gets saturated.
- Step 2: Wring And Wipe
Take the soft sponge out of the soap solution and wring it out. If the sponge drips when squeezed then you will end up making more of a mess.
Wipe the window however you wish, rinsing off the sponge often. Make sure you get the top edge of the window by rolling it down a few inches.
- Step 3: Dry The Window
Once all the dirt is gone, take a microfiber cloth and dry the window.
Use a horizontal pattern, working your way from top to bottom. If the cloth becomes damp, flip it over or grab a new one.
Make sure the window is bone dry.
- Step 4: Finish Off With Method two Or Three
If you inspect your window now, you will probably notice some streaks and watermarks.
You will need to use one of the methods detailed above to get rid of those. It is best to clean all of your windows before moving on to the above methods to avoid dirtying windows that you have already finished.
Water For Routine Cleaning
If you like to clean your car every weekend, you can keep your tinted windows clean with water.
Step 1: Mist The Window With Water
For this first method, you are not going to use any cleaning solutions at all. Instead, fill a spray bottle with clean water.
Spray a light mist of water onto the interior of the window. Alternatively, you could spray a microfiber cloth.
Step 2: Clean Vertically, Then Horizontally
Take your microfiber cloth and clean the window vertically. Make sure to cover the whole window fairly evenly so that individual droplets do not remain.
Then, wipe the window horizontally, working your way from the top to the bottom.
Step 3: Repeat Until Clean
Next, inspect the window for streaks and dirt marks.
The downside to using water on its own is that you are relying on the cloth to pick up any contaminants, so you may have to repeat the above steps a few times to get a perfect clean.
Step 4: Clean The Top Of The Window
Now, roll down your window so that you can wipe down the top line.
If you forget this step you will end up with a dirty strip that will become apparent any time you roll the window down.
Step 5: Dry
Finally, dry the window with a fresh microfiber cloth. Make sure it is thoroughly dried as even a small amount of water left on the window will leave a noticeable mark when it has dried.
Glass Cleaner For Gleaming Windows
If you clean your windows less often, or you have children that like to leave fingerprints all over them, you will need to use a chemical cleaner.
Step 1: Choosing A Cleaning Fluid
You must choose a suitable cleaning fluid for tinted windows.
Glass cleaners without ammonia, distilled water with some alcohol, or purpose-manufactured window tint cleaners are all suitable.
Never use ammonia-based cleaners on tinted windows. You will degrade the tint.
Step 2: Spray The Window
Take your spray bottle of cleaning fluid and spray it on the interior of the window.
Have your microfiber cloth ready because glass cleaner and other cleaning fluids dry quickly, and you want to avoid allowing it to dry on.
Step 3: Clean The Window
First, use your cloth to get the glass cleaner evenly spread across the window. Make sure to get into the corners.
Roll down the window a few inches and get some of the cleaning fluid onto the portion that sits under the rubber.
Use a new cloth, or the dry side of the same cloth, to clean horizontally from the top to the bottom.
Step 4: Dry The Window
Take a new cloth and dry the window. Make sure to get all of the cleaning fluid off as if you allow it to dry it will leave marks.
If, after closer inspection, some streaks remain then you will need to repeat the process with fresh cloths.
We hope this guide has helped you to clean your tinted car windows. With a little care and attention, you can keep your tinted windows looking as great as they did on the first day you got them.
If you have any questions or comments about this guide or cleaning tinted windows in general, please feel free to leave them in the section below.